Ok! Here we go last weekend I replaced the stator put a new piston in , replaced all the gaskets and used sealant and change the spark plug! Rode it for about 20 minutes and it cut out! After 5 mins it started! But then died again! And now won’t start! !
There seems plenty of juice in the battery, but obviously dies with continuous using of the electric start (kick start isn’t any better)! So i stripper the carb! Gave it all a good clean! Ensured all the mixer screws was set to what it was before I stripped it, Drained the fuel tank and added new fuel, cleaned the spark plug and I have a spark! But the bloody thing not start! It sounds like it is trying desperately to start when I pull the throttle but it doesn’t seem to have enough to get to the final stage of starting! The carb does have fuel in it as I have undone the screw and it comes out! Fuel is coming out of the vacuum pump and the carb has enough vacuum to draw fuel! I am scratching my head constantly as I can’t seem to figure this out! Any help would be appreciated before I give up and ever pay of a bike mechanic to look at it or accident light a fag next to the carb when the fuel pipe is off 😂😂