« previous next »
Pages: [1]

Author Topic: No Power but the engine runs  (Read 1763 times)

mhaseebalam

  • Newbie
  • *
  • Posts: 10
    • View Profile
No Power but the engine runs
« on: March 21, 2021, 06:09:09 PM »
So I put the engine back together, new engine oil new spark plug and I took to the nearby scooter shop to adjust the valves. When I got it back I couldnt even stick in the smallest feeler gauge I have which 0.04mm and also what is suggested by the service manual. when I try to accelerate the scooter I get no power. When it's on the center stand the wheel spins and when I accelerate it the sound changes and vibrates a lot. But if I put it off the stand I have like zero power.
Logged

big blue

  • Hero Member
  • *****
  • Posts: 1183
    • View Profile
Re: No Power but the engine runs
« Reply #1 on: March 21, 2021, 06:37:40 PM »
Hello I think that your valve settings numbers are in error. They should be .004 INCH or .1MM. Your .04 would be very tight so you might have compression leaking through the valves.
Logged
2012 Kymco Like 200i LX (Sold)  Salem, Oregon USA

mhaseebalam

  • Newbie
  • *
  • Posts: 10
    • View Profile
Re: No Power but the engine runs
« Reply #2 on: March 23, 2021, 05:26:37 PM »
Hi, I had the same thought since there was literally no gap when i got it back from the shop. I just changed it to 0.1mm or 0.004 inch. However it made no difference. Attached a video to better explain it.

Logged

big blue

  • Hero Member
  • *****
  • Posts: 1183
    • View Profile
Re: No Power but the engine runs
« Reply #3 on: April 01, 2021, 06:56:47 PM »
Ever get this solved?
Logged
2012 Kymco Like 200i LX (Sold)  Salem, Oregon USA

punktnet

  • Newbie
  • *
  • Posts: 15
    • View Profile
Re: No Power but the engine runs
« Reply #4 on: June 23, 2021, 12:45:37 PM »
Quote from: mhaseebalam on March 23, 2021, 05:26:37 PM


Clean the carb, jets, had same problem
Logged

An Error Has Occurred!

Call to undefined function split()
Back