Author Topic: Rectifier location  (Read 1235 times)

Adamski

  • Newbie
  • *
  • Posts: 2
    • View Profile
Rectifier location
« on: August 30, 2021, 05:24:48 PM »
Hi. I need to swap out the rectifier on an agility rs50 2t but can't locate it easily. Online manual suggests steering column but it isn't there. Any help appreciated so I don't have to remove all the bodywork!

Regressor

  • Newbie
  • *
  • Posts: 2
    • View Profile
Re: Rectifier location
« Reply #1 on: August 31, 2021, 03:15:57 PM »
I think it is on the steering, (behind the headlight\plastic front cover).
Just remove the front plastic\headlight, should be right behind it next to the horn.

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7763
  • West Tennessee, USA
    • View Profile
Re: Rectifier location
« Reply #2 on: August 31, 2021, 06:14:50 PM »
I think it is on the steering, (behind the headlight\plastic front cover).
Just remove the front plastic\headlight, should be right behind it next to the horn.
Follow the yellow wires (or black and green)(or whatever colors) out of the stator and trace them to the first electrical thingy they are connected. That will be the regulator-rectifier.

The stator is usually on the right-hand side of the engine...
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

Adamski

  • Newbie
  • *
  • Posts: 2
    • View Profile
Re: Rectifier location
« Reply #3 on: September 01, 2021, 05:45:54 AM »
Thanks guys. Hoped it was on steering column as less bodywork to remove, but nothing! Will follow the wiring.

martinhedges

  • Newbie
  • *
  • Posts: 13
    • View Profile
Re: Rectifier location
« Reply #4 on: September 01, 2021, 08:55:11 AM »
Thanks guys. Hoped it was on steering column as less bodywork to remove, but nothing! Will follow the wiring.

ON my agility 50 is it behind the front bodywork near the horn.  Black unit with fins on it and a white connector with 4 terminals (and 5 wires - 2 wires to one of the connectors).  It is bolted onto a bracket.

An Error Has Occurred!

Call to undefined function split()