Author Topic: Running problems  (Read 1060 times)

Commanderlaw

  • Newbie
  • *
  • Posts: 1
    • View Profile
Running problems
« on: November 23, 2010, 06:13:40 PM »
Recently bought a second hand Super 9. 

It starts no problem and initially ran well. 

However after a week or so it started misbehaving in that it cuts out when pulling off unless the brake lever is held on slightly.

The bike continues to start no problem.  I suspect the electrics connected to the start mechanism where the brake has to be applied during initial starting.

Anyone have any ideas?

Rianna

  • Hero Member
  • *****
  • Posts: 1804
    • View Profile
Re: Running problems
« Reply #1 on: November 23, 2010, 07:03:29 PM »
If you're suspect it's just the wiring you may have to take those covers off and follow the wire to look for nicks or pinched sections and check to make sure the connections are secure. Welcome to the forum, Commanderlaw. I hope it's an easy fix for ya and Congrats on that Super 9! It's an excellent scoot choice!!
« Last Edit: November 23, 2010, 07:06:07 PM by Rianna »

An Error Has Occurred!

Call to undefined function split()