Author Topic: hard starting without baffle  (Read 874 times)

Iahawk

  • Hero Member
  • *****
  • Posts: 2634
  • Eastern Iowa, USA
    • View Profile
hard starting without baffle
« on: April 03, 2023, 03:41:25 AM »
this is more of an observation than anything...but I'd pulled the baffle out of my slip on muffler on my little Ninja in January. It sounds great with it out, if not just a little too loud. ..but the first time I started it without the baffle I noticed it went from the usual Da-Da-Vroom, an immediate start, to more of a Da-Da-Da-Da-Da, nothing...Da-Da-Da-Da-Da, nothing...and finally Da-Da-Da-Da-Da-Vroom.

I chalked the first slow start up to it sitting, cold, for many weeks. Same thing happened the next time I started it..a  very slow start..and then today I put the baffle back in and it fired right up. Da-Da-Vroom!

So I guess the bike needs a certain amount of back pressure to help it start efficiently? I wasn't expecting such a difference with baffle in vs baffle out.
2010 People S200 - sold after 8 wonderful years!
2014 Ninja 300
1996 Honda Helix
1984 Honda Nighthawk 650

Stig / Major Tom

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 14679
  • Rural Ohio
    • View Profile
Re: hard starting without baffle
« Reply #1 on: April 03, 2023, 09:42:17 AM »
I love it when old Mr Donfool Widdit teaches me something 🙃

Syig
Boston Strong
Rural Ohio

And, I'm feeling a little peculiar.

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7763
  • West Tennessee, USA
    • View Profile
Re: hard starting without baffle
« Reply #2 on: April 03, 2023, 12:25:07 PM »
this is more of an observation than anything...but I'd pulled the baffle out of my slip on muffler on my little Ninja in January. It sounds great with it out, if not just a little too loud. ..but the first time I started it without the baffle I noticed it went from the usual Da-Da-Vroom, an immediate start, to more of a Da-Da-Da-Da-Da, nothing...Da-Da-Da-Da-Da, nothing...and finally Da-Da-Da-Da-Da-Vroom.

I chalked the first slow start up to it sitting, cold, for many weeks. Same thing happened the next time I started it..a  very slow start..and then today I put the baffle back in and it fired right up. Da-Da-Vroom!

So I guess the bike needs a certain amount of back pressure to help it start efficiently? I wasn't expecting such a difference with baffle in vs baffle out.
Mixture change regardless of method (analog carb or digital EFI).
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

Iahawk

  • Hero Member
  • *****
  • Posts: 2634
  • Eastern Iowa, USA
    • View Profile
Re: hard starting without baffle
« Reply #3 on: April 03, 2023, 01:52:33 PM »
Mixture change regardless of method (analog carb or digital EFI).

Karl, I would have thought that a fuel injected bike would compensate for the difference? Maybe it's not that smart!
2010 People S200 - sold after 8 wonderful years!
2014 Ninja 300
1996 Honda Helix
1984 Honda Nighthawk 650

NorWeWa

  • Sr. Member
  • ****
  • Posts: 336
    • View Profile
Re: hard starting without baffle
« Reply #4 on: April 03, 2023, 03:00:46 PM »
Every EFI has a range it can adjust for. I suspect you are just a bit lean. That's why they sell those EFI tuners.   https://www.dynojet.com/power-commander-fc-for-kawasaki-ex250-europe-only/  Personally I'd put the baffle back in or the stock exhaust. 

Art 
« Last Edit: April 03, 2023, 11:53:59 PM by NorWeWa »

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7763
  • West Tennessee, USA
    • View Profile
Re: hard starting without baffle
« Reply #5 on: April 04, 2023, 07:42:19 AM »
Every EFI has a range it can adjust for. I suspect you are just a bit lean. That's why they sell those EFI tuners.   https://www.dynojet.com/power-commander-fc-for-kawasaki-ex250-europe-only/  Personally I'd put the baffle back in or the stock exhaust. 

Well said!

Art
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

Iahawk

  • Hero Member
  • *****
  • Posts: 2634
  • Eastern Iowa, USA
    • View Profile
Re: hard starting without baffle
« Reply #6 on: April 04, 2023, 12:51:41 PM »
yes, my brief hooligan experiment is over, the baffle is in (pic shows baffle in)! Baffle out sounds pretty cool but drones a bit too much at speed, even with ear plugs in. I can't imagine listening to that for an hour or 2 at a time.

Stock muffler weighs about 3x as much and sounds like a scooter...it's been on the shelf in the garage for about 6 years, now. It's staying there!
2010 People S200 - sold after 8 wonderful years!
2014 Ninja 300
1996 Honda Helix
1984 Honda Nighthawk 650

NorWeWa

  • Sr. Member
  • ****
  • Posts: 336
    • View Profile
Re: hard starting without baffle
« Reply #7 on: April 04, 2023, 09:08:18 PM »
Scooterpartsco.com sells a Malossi slip on exhaust for my Downtown 300 that I have looked at, feeling it would be nice to get rid of the heavy exhaust, but I don't want my scooter to sound loud at all.  Plus the way I ride I don't really notice any problems with the weight.     https://scooterpartsco.com/index.php?main_page=product_info&cPath=120_3522&products_id=958

Art 

JJJoseph

  • Hero Member
  • *****
  • Posts: 892
  • Kymco Sento
    • View Profile
Re: hard starting without baffle
« Reply #8 on: April 05, 2023, 10:32:42 PM »
I chalked the first slow start up to it sitting, cold, for many weeks.

This is typical for carbureted machines!  Above 10°C they start effortlessly, but below I have to pray for it to start without a tussle!  But my F/I motos always start first touch every time.

Iahawk

  • Hero Member
  • *****
  • Posts: 2634
  • Eastern Iowa, USA
    • View Profile
Re: hard starting without baffle
« Reply #9 on: April 06, 2023, 12:43:13 PM »
This is typical for carbureted machines!  Above 10°C they start effortlessly, but below I have to pray for it to start without a tussle!  But my F/I motos always start first touch every time.

that's the odd thing, my bike is fuel injected and has always started at the touch of the starter button...but not with the baffle out.
2010 People S200 - sold after 8 wonderful years!
2014 Ninja 300
1996 Honda Helix
1984 Honda Nighthawk 650

Neil955i

  • Hero Member
  • *****
  • Posts: 4539
  • Cheshire, UK. The older I get, the faster I was...
    • View Profile
Re: hard starting without baffle
« Reply #10 on: April 07, 2023, 09:40:47 AM »
that's the odd thing, my bike is fuel injected and has always started at the touch of the starter button...but not with the baffle out.

Think you’re on the money with your back pressure theory Hawk.
Regards & ride safe,
Neil

Current garage:  Kymco DTX360 & Triumph Street Triple 675R
Past bikes: BSA C15. Honda S/wing (GL500). Kawasaki GPz750. BMW K100RS. Kawasaki GPZ900R. Yamaha FJ1200 x2. Sprint. Triumph Daytona 900. Kawasaki ZX-7R. T595 Daytona. Kawasaki ZX-9R x2. Triumph Daytona 955i. X-Town

An Error Has Occurred!

Call to undefined function split()