Author Topic: 2012 MXU 500 FI- Starts but won't Idle/Run *** Help***  (Read 1043 times)

Kymco Canuck

  • Newbie
  • *
  • Posts: 1
    • View Profile
2012 MXU 500 FI- Starts but won't Idle/Run *** Help***
« on: September 30, 2023, 11:48:00 PM »
This machine will run off of starter fuel through the airbox, but not otherwise.
New Spark plug, New Fuel Injector, Oil change, Coolant change...

Removed fuel filter, checked pump- tested fuel pressure (bops between 40-50psi)
Removed air filter
Compression test- 210PSI
Checked and set valve clearances
3000kms on a lightly used machine. On 3rd fuel pump - machine has been problematic for a few years. Seems the pump wasn't the problem all along.

Turn key on- Check engine light stays on until pump stops. I can then start it...idles for 2-3 secs then bogs out like a carborated machine.

I'm baffled... don't know where else to look other than spending a small fortune on a scan tool.
*** note ***  while Kymco parts are exceptionally expensive, I've had good luck finding the exact corresponding arctic cat or yamaha parts for 1/3 the price.


Ruffus

  • Hero Member
  • *****
  • Posts: 1742
    • View Profile
Re: 2012 MXU 500 FI- Starts but won't Idle/Run *** Help***
« Reply #1 on: October 01, 2023, 06:01:03 PM »
Did you do a TPS reset?
Happy and safe scootering, Ruffus

An Error Has Occurred!

Call to undefined function split()