Author Topic: need help ?  (Read 1675 times)

02 zx 50 s.f.

  • Jr. Member
  • **
  • Posts: 52
    • View Profile
need help ?
« on: March 01, 2011, 02:09:06 PM »
 ??? i have a 02 zx50 super fever as it sits it does 50mph but i just read all the posts about derestricting the cdi to make it get 50 but mine does 50 and the cdi has been left alone by the way i bought it used by a older guy who had it and a 200cc kymco he bought after the zx but 3months after he bought it he got t-boned on the 200cc and died. so r.i.p but i know he did not do much because he had it worked on at the shop i use and thy told me it is bone stock. he did not buy there but they have had it all apart before to work on it. i am lost i wana know why it is so fast for being bone stock.
 

juice

  • Hero Member
  • *****
  • Posts: 668
    • View Profile
Re: need help ?
« Reply #1 on: March 01, 2011, 02:57:05 PM »
I have a bone stock 2002 people 50 that does 50 mph . I was told in 2002 Kymco didn't restrict the p50 . Maybe the same is true for your zx .

02 zx 50 s.f.

  • Jr. Member
  • **
  • Posts: 52
    • View Profile
Re: need help ?
« Reply #2 on: March 01, 2011, 07:34:25 PM »
just spliced the wire and got 55 top but takes forever to get there

thebatman

  • Hero Member
  • *****
  • Posts: 2432
  • The Bat lives on... like the fkn Energizer Bunny
    • View Profile
Re: need help ?
« Reply #3 on: March 01, 2011, 11:47:45 PM »
Somethings not right... The BEST i got..... was 53 out of my "stock" zx....ported,pipe,jetted,squish,etc...
You have to have a kit on there if your riding at 55 now..
50 with a rescricted scoot???????????   not a 50cc
"THE BAT"MAN...
Says:
"A goal without a plan is just a dream"......

sidthesloth

  • Hero Member
  • *****
  • Posts: 2313
  • Kymco ZX50
    • View Profile
Re: need help ?
« Reply #4 on: March 02, 2011, 04:49:03 AM »
G'day thebatman, his speedo might be out a little more than most, hard to believe cause they are a long way out to start with. Mine did about 75 with derestricted cvt, 85 jet and a touch over 80 with cdi limiter bridged.
« Last Edit: March 07, 2011, 11:45:30 PM by sidthesloth »
ZX50, 47mm cyl. kit, TZR50 CDI. Michelin Pilot Sport tyres,
Next performance mod; pumping the tyres up.

02 zx 50 s.f.

  • Jr. Member
  • **
  • Posts: 52
    • View Profile
Re: need help ?
« Reply #5 on: March 02, 2011, 12:46:43 PM »
i know forshure it does 55 my  brother just spent 250.00 on a leovince kit it came wit 70cc jets exaughst new clutch with rollers and springs before he did about 45 after they told him the gps said it does 50 but i get about 2 cars ahead of him at top speed? and my scooter says 50 but if i get a long stright it will slowly get to 55.

02 zx 50 s.f.

  • Jr. Member
  • **
  • Posts: 52
    • View Profile
Re: need help ?
« Reply #6 on: March 02, 2011, 01:49:13 PM »
i just took it down the street where there is a speed detector it matched the scoot it told me a flat 50 my scoot said flat 50? not alot of run to try to get 55 but whatever im satisfied for $600 damn good deal.

thebatman

  • Hero Member
  • *****
  • Posts: 2432
  • The Bat lives on... like the fkn Energizer Bunny
    • View Profile
Re: need help ?
« Reply #7 on: March 03, 2011, 11:29:20 PM »
i know forshure it does 55 my  brother just spent 250.00 on a leovince kit it came wit 70cc jets exaughst new clutch with rollers and springs before he did about 45 after they told him the gps said it does 50 but i get about 2 cars ahead of him at top speed? and my scooter says 50 but if i get a long stright it will slowly get to 55.

So it's kitted then, it's not stock
"THE BAT"MAN...
Says:
"A goal without a plan is just a dream"......

02 zx 50 s.f.

  • Jr. Member
  • **
  • Posts: 52
    • View Profile
Re: need help ?
« Reply #8 on: March 05, 2011, 07:54:14 PM »
my brothers people 50 yes my zx no and i still pass him

An Error Has Occurred!

Call to undefined function split()