« previous next »
Pages: [1]

Author Topic: help to remove face plate  (Read 1477 times)

tony55

  • Newbie
  • *
  • Posts: 2
    • View Profile
help to remove face plate
« on: April 05, 2011, 08:39:24 PM »
Please can anyone help??????? I have a kymco super 9 that only goes 30 mph i have purchased the new smooth bush to increase speed.I removed the kick start then the cover then the nut and 3 pronged washer.....but cannot remove the face plate due to i think spline damage.....can anyone help i am desperate!
Logged

codger78

  • Full Member
  • ***
  • Posts: 113
    • View Profile
Re: help to remove face plate
« Reply #1 on: April 05, 2011, 09:30:58 PM »
tony55.....As you sent me an email directly, I will respond.
I am sorry to say that I can't help you with your problem.  There are a number of other members on this forum that are expert with such helpful advice and I hope that they can be of some service to you.
....Good luck
Logged
borrowed dust

blue

  • Hero Member
  • *****
  • Posts: 3935
    • View Profile
Re: help to remove face plate
« Reply #2 on: April 07, 2011, 01:20:02 AM »
IF YOU CAN GET HOLD OF A IMPACT THAT WELL HELP. If not do a search on the fourm I know I had on here some wear. and also you can google it youtube has a video that well help its about takeing a openend wrench and a socket it works I do it all the time. pretty cool .
Logged

sidthesloth

  • Hero Member
  • *****
  • Posts: 2313
  • Kymco ZX50
    • View Profile
re: looking for help, please! having bogging issues with zx50
« Reply #3 on: April 07, 2011, 05:08:21 AM »
Is it spline damage or some threadlock holding the drive face on? Once you have the nut off, you should be able to pull the drive face off. It may just be a little stubborn.
Logged
ZX50, 47mm cyl. kit, TZR50 CDI. Michelin Pilot Sport tyres,
Next performance mod; pumping the tyres up.

marioG

  • Sr. Member
  • ****
  • Posts: 295
    • View Profile
Re: help to remove face plate
« Reply #4 on: April 25, 2011, 05:04:02 AM »
u need locking device.....need to lock spinning...

but after that u need to screw nut at wright force....

buy wrench or impact....
Logged
FUBAR is an acronym that commonly means "f***ed up beyond all recognition/any repair".

Peters

  • Hero Member
  • *****
  • Posts: 1582
  • In Glock I Trust
    • View Profile
Re: help to remove face plate
« Reply #5 on: May 04, 2011, 11:53:10 PM »
Sounds like he got the nut off. If you have the nut removed an impact wrench wouldn't help. You need a three jaw pully puller. Or a two jaw doesn't matter. Any medium puller tool would work
Logged
*2010 People 50 2t with 70cc kit and more
*2001 ZX-50 beater

An Error Has Occurred!

Call to undefined function split()
Back