« previous next »
Pages: 1 [2] 3 4

Author Topic: slider weights for agility 125  (Read 19702 times)

marioG

  • Sr. Member
  • ****
  • Posts: 295
    • View Profile
Re: slider weights for agility 125
« Reply #15 on: May 18, 2011, 06:43:04 PM »
jesus,

im trying to buy dr pulleys, and after this thred --- dont really know... maybe

But I think that the belt was too short...743?

Logged
FUBAR is an acronym that commonly means "f***ed up beyond all recognition/any repair".

axy

  • Hero Member
  • *****
  • Posts: 2210
    • View Profile
Re: slider weights for agility 125
« Reply #16 on: May 18, 2011, 06:59:52 PM »
Old belt is back on, I hope nothing is bent.

Here is the new (!) belt after 7 kms.

It is OEM dimensions 781x20. I have this confirmed because I took picture of the new belt before installing (snapping!) and checked 100 times I ordered the right length and width.
I am enclosing this picture too.

Crap magnet: confirmed.

Beware that this issue is not slider related. Sliders just started shuddering after 800 kms, new rollers and belt were installed yesterday and belt exploded.
Sliders seem to be crap for other reasons. :)

I must be the only idiot on this forum who maintains the scoot overzealously just to CAUSE the issue I am trying to avoid by regular maintenance!!!
GAAAAAAAAAAAAAAAAAA!!!  :( ??? :-[
« Last Edit: May 18, 2011, 07:39:15 PM by axy »
Logged
---
Kymco People GT300i 2017 ABS Euro4
Kymco Agility 125 2008

(Past: Kymco People 250S, Piaggio Beverly 200, Kawasaki ZR-7S, Yamaha TW125, Kymco Cobra Cross 50, Peugeot Zenith 50, Piaggio NRG 50 mc2 72 cc Naraku kit)

axy

  • Hero Member
  • *****
  • Posts: 2210
    • View Profile
Re: slider weights for agility 125
« Reply #17 on: May 18, 2011, 07:28:24 PM »
I have checked, sliders were in vario for 850 kms.

Here is what they look like.

It is hard to evaluate wear level, but to me they seem a bit too worn for just 850 kms.

OEM rollers lasted for first 12.500 kms and looked fine when I replaced them.
Logged
---
Kymco People GT300i 2017 ABS Euro4
Kymco Agility 125 2008

(Past: Kymco People 250S, Piaggio Beverly 200, Kawasaki ZR-7S, Yamaha TW125, Kymco Cobra Cross 50, Peugeot Zenith 50, Piaggio NRG 50 mc2 72 cc Naraku kit)

axy

  • Hero Member
  • *****
  • Posts: 2210
    • View Profile
Re: slider weights for agility 125
« Reply #18 on: May 18, 2011, 07:36:40 PM »
Finally, clutch was disassembled and cleaned. Threads of blown belt were tied around the axle, so it had to be disassembled.
Here is what the clutch looks like after exactly 24.000 kms.
Logged
---
Kymco People GT300i 2017 ABS Euro4
Kymco Agility 125 2008

(Past: Kymco People 250S, Piaggio Beverly 200, Kawasaki ZR-7S, Yamaha TW125, Kymco Cobra Cross 50, Peugeot Zenith 50, Piaggio NRG 50 mc2 72 cc Naraku kit)

axy

  • Hero Member
  • *****
  • Posts: 2210
    • View Profile
Re: slider weights for agility 125
« Reply #19 on: May 18, 2011, 07:37:52 PM »
...
Logged
---
Kymco People GT300i 2017 ABS Euro4
Kymco Agility 125 2008

(Past: Kymco People 250S, Piaggio Beverly 200, Kawasaki ZR-7S, Yamaha TW125, Kymco Cobra Cross 50, Peugeot Zenith 50, Piaggio NRG 50 mc2 72 cc Naraku kit)

old mod

  • Full Member
  • ***
  • Posts: 131
    • View Profile
Re: slider weights for agility 125
« Reply #20 on: May 18, 2011, 07:44:54 PM »
I think wear seems reasonable..ish, so why did a new belt snap??? poor manufacture? i hope you can get some compensation for your trouble!
Logged

bthmtech

  • Newbie
  • *
  • Posts: 34
    • View Profile
Re: slider weights for agility 125
« Reply #21 on: May 18, 2011, 08:15:56 PM »
AXY ,it looks like you have either grease or trans oil on your clutch shoes,when I took mine apart I noticed grease from the clutch bearing was on my shoes ,It was also built up in the clutch bell,so I cleaned it up good with brakekleen and had to "burn in clutch".I have been an import auto tech for over 25 yrs and sometimes when shoes get contaminated they do not work correctly afterwords mine still grabs pretty bad after burn in ,so I am getting ready to recheck,will let you know how it turns out ,  bthmtech
Logged

axy

  • Hero Member
  • *****
  • Posts: 2210
    • View Profile
Re: slider weights for agility 125
« Reply #22 on: May 18, 2011, 09:20:07 PM »
Quote from: bthmtech on May 18, 2011, 08:15:56 PM
AXY ,it looks like you have either grease or trans oil on your clutch shoes,when I took mine apart I noticed grease from the clutch bearing was on my shoes ,It was also built up in the clutch bell,so I cleaned it up good with brakekleen and had to "burn in clutch".I have been an import auto tech for over 25 yrs and sometimes when shoes get contaminated they do not work correctly afterwords mine still grabs pretty bad after burn in ,so I am getting ready to recheck,will let you know how it turns out ,  bthmtech

Nothing wet there, it was just dust and debris from the belt. All cleaned now and slightly sanded.
Logged
---
Kymco People GT300i 2017 ABS Euro4
Kymco Agility 125 2008

(Past: Kymco People 250S, Piaggio Beverly 200, Kawasaki ZR-7S, Yamaha TW125, Kymco Cobra Cross 50, Peugeot Zenith 50, Piaggio NRG 50 mc2 72 cc Naraku kit)

marioG

  • Sr. Member
  • ****
  • Posts: 295
    • View Profile
Re: slider weights for agility 125
« Reply #23 on: May 18, 2011, 10:08:07 PM »
threds around rear axle....only kevlar have threds...kevlar 781 is just too short...800 is ok....

did u put sliders right? think becouse something needs to be wrong...

u cant have that bad luck.....
Logged
FUBAR is an acronym that commonly means "f***ed up beyond all recognition/any repair".

bthmtech

  • Newbie
  • *
  • Posts: 34
    • View Profile
Re: slider weights for agility 125
« Reply #24 on: May 18, 2011, 10:26:03 PM »
Well did redress on clutch shoes & bell ,works great now,got 6mths left on warrenty then its katy bar the doors! this is my 2nd kymco first was 04 zx50 witch needless to say I went to town on,I do not think there was a stock part left on it.I got it to do 60mph but she was an evil being.Do not want to get to that point with this bike,I just want it to be stronger.Top speed is not what I am looking for,0to60mph is what I need,going to start with dr.pully variator&clutch can get for $375 has anyone used this setup?
Logged

axy

  • Hero Member
  • *****
  • Posts: 2210
    • View Profile
Re: slider weights for agility 125
« Reply #25 on: May 19, 2011, 09:43:03 AM »
Quote from: marioG on May 18, 2011, 10:08:07 PM
threds around rear axle....only kevlar have threds...kevlar 781 is just too short...800 is ok....

did u put sliders right? think becouse something needs to be wrong...

u cant have that bad luck.....

The sliders were put correctly.

Question: OEM belt is 781, the snapped one was 781. Why do you think kevlar should be longer?
Logged
---
Kymco People GT300i 2017 ABS Euro4
Kymco Agility 125 2008

(Past: Kymco People 250S, Piaggio Beverly 200, Kawasaki ZR-7S, Yamaha TW125, Kymco Cobra Cross 50, Peugeot Zenith 50, Piaggio NRG 50 mc2 72 cc Naraku kit)

Cortez

  • Hero Member
  • *****
  • Posts: 1141
    • View Profile
    • My flickr account
Re: slider weights for agility 125
« Reply #26 on: May 19, 2011, 03:52:11 PM »
Quote from: axy on May 19, 2011, 09:43:03 AM
The sliders were put correctly.

Question: OEM belt is 781, the snapped one was 781. Why do you think kevlar should be longer?

Less 'stretchy'?
Wild guess.
Logged
'08 FZ6n S2 ABS

SOLD: 2003 Peugeot Speedfight2 LC, 2007 Kawasaki ER-6F ABS, 2006 Kymco Agility 125, '12 Kymco Downtown 300i ABS,

marioG

  • Sr. Member
  • ****
  • Posts: 295
    • View Profile
Re: slider weights for agility 125
« Reply #27 on: May 19, 2011, 06:11:47 PM »
Quote from: axy on May 19, 2011, 09:43:03 AM
The sliders were put correctly.

Question: OEM belt is 781, the snapped one was 781. Why do you think kevlar should be longer?

Well,

mine kevlar was too short and it brake after 20km. and threds gather up at front axle and screwed up oil ring........

i think that u put sliders wrong way

Logged
FUBAR is an acronym that commonly means "f***ed up beyond all recognition/any repair".

axy

  • Hero Member
  • *****
  • Posts: 2210
    • View Profile
Re: slider weights for agility 125
« Reply #28 on: May 19, 2011, 08:15:40 PM »
They were installed correctly, not like on this picture.
Logged
---
Kymco People GT300i 2017 ABS Euro4
Kymco Agility 125 2008

(Past: Kymco People 250S, Piaggio Beverly 200, Kawasaki ZR-7S, Yamaha TW125, Kymco Cobra Cross 50, Peugeot Zenith 50, Piaggio NRG 50 mc2 72 cc Naraku kit)

marioG

  • Sr. Member
  • ****
  • Posts: 295
    • View Profile
Re: slider weights for agility 125
« Reply #29 on: May 20, 2011, 03:55:11 AM »
then,

ill stay with rollers.....just lighter and stiffer central spring....

thanks
Logged
FUBAR is an acronym that commonly means "f***ed up beyond all recognition/any repair".

An Error Has Occurred!

Call to undefined function split()
Back