big build!!!some advice or tips would help

[thebatman]

http://www.treatland.tv/OKO-24mm-carburetor-p/oko-24mm-carburetor-clear.htm

Here is the link to the place i have been getting my jets....
Pretty fast on shipping from them also, of course they sell "kits", i dont think they sell single jets like S.A does

[Pattyboi33]

Ok so I bought a pack of ten main jets an a pack of ten slow jets I'm going to put a 170 main an see where to go from there idk why but I have this funny feeling that I'm going to need a monster size jet

[thebatman]

Good deal.....
  WOW... A 170?    Where about's are you residing?   i'm thinking that'll be WAY rich
Oh yeah, btw, have you done a leak down test?...to test for any leaking gaskets... I had a blown head gasket before and it leaned the piss out of my baby....(soapy water works too...lol)

[Pattyboi33]

It's just a wild guess an I'm thinking so because I'm mixing 32/1 so the oil is taking up octain in the fuel and I removed the oil pump . But why do the leak down test ? There all brand new gaskets

[sidthesloth]

You would be surprised at how many leaks you might have. I have heard that the oko inlet and reed cage can be bad for leaks.

[thebatman]

I been running right around 40:1.....
Yeah, sids right.. I know i've had several leaks around the intake/reed cage myself... ANd a word of caution/advice..... Keep an eye on all bolts and nuts also, mine have worked loose/.... Guess that's why somebody invented loctite ..
Carb cleaner is good to use also but of course the scoot needs to run and w/o the fan shroud you cant let it run long.... I woulda thought a 130 would be plenty big enough, but of course i'm still learning...
You can make a tester pretty cheap, if you search for the cheaper prices but around $20 i have in mine. It's not fancy but it works

[Pattyboi33]

I used thread locker on every bolt lol an I used a sealant on the gaskets for the reeds when i did it to

[sidthesloth]

I don't think threadlock will be too good for retorque.

[Pattyboi33]

Very true good thing I bought a new tap an die set ^_^ so the jets came in any suggest would be cool I get new mains an pjs

[Pattyboi33]

I'm going to do a leak down test I'm holding I don't have any leaks I honestly don't wanna tear this thing down to far again

[Pattyboi33]

So I did the leak test an I'm good now I went to play with some jets an I was revving it an it jus lost spark idk what happen

[Pattyboi33]

It was my coil now I have the tzr50 cdi