clutch problem...?

[GM6969]

Hello to all,

can you suggest give me ideas, how to understand if clutch is broken?
Seems like a have this problem, but not 100% sure.

Thank you in advance.

Gallo

[streido]

Probably best to 1st open up the cvt cover and take the bell housing off to remove the clutch assembly and have a look at it. Make sure you have some depth left on the clutch pads and check no springs are broken or loose. Also give a clean out if its dirty inside.

If the clutch looks ok it may just be dirt in it and a good clean can fix it.

[GM6969]

Probably best to 1st open up the cvt cover and take the bell housing off to remove the clutch assembly and have a look at it. Make sure you have some depth left on the clutch pads and check no springs are broken or loose. Also give a clean out if its dirty inside.

If the clutch looks ok it may just be dirt in it and a good clean can fix it.

yes, good idea to clean up, will look on the weekend.
Thank you1

[streido]

My clutch was not fully dis-engaging when I stopped at lights etc a while ago. I took it apart and cleaned it up and it worked fine after that. Hopefully it may work for you too.

[GM6969]

My clutch was not fully dis-engaging when I stopped at lights etc a while ago. I took it apart and cleaned it up and it worked fine after that. Hopefully it may work for you too.

Thank you, I will try to open all the vario side tomorrow.