Dr Pulley 20x12 14GR

[Adept]

@Adept
So nice to hear from you, since you are the one who tried many different settings.
Would you think 15.5g is still a good idea for two up riding? (Im 180lbs, and my speed limiter is 120lbs)
I already ordered the 15.5g but if 15g would be better then I will order both
Have a nice weekend.

I am 220lbs and my "fuel chicken" (lazy translation from hungarian ) is 120lbs too.
 With two person I think you won't feel the difference the two kind of weights.
IMHO you must set the best with one rider.

My next roller will be 15,5gr. The mixing is a dead-end (Zombie got the point!!)

Report if you got the roller!!!

[kfc.android]

I am 220lbs and my "fuel chicken" (lazy translation from hungarian ) is 120lbs too.
 With two person I think you won't feel the difference the two kind of weights.
IMHO you must set the best with one rider.

My next roller will be 15,5gr. The mixing is a dead-end (Zombie got the point!!)

Report if you got the roller!!!

@Adept:
Haha, fuel chicken, that's a good one 
I will report back with the result of 15.5 slider once I put them on, been too busy to work on my bike recently, but I will make sure to share my two cents.

[Adept]

How did they make the 15,5gr roller? Drill out a 0,5gr?

[kfc.android]

How did they make the 15,5gr roller? Drill out a 0,5gr?

@Adept,
I wonder how they made it, too.
According to the answer from my seller, they edged out 0.5g from the 16g sliders.
Not sure how/where the "edged" the slider but seems like many people also used this setting in Taiwan so I decided to give it a try.
 

[Adept]

Now I got the inspiration from you!!
I have a 16gr roller set... I will look for a man who make me a 15,5gr roller.
 

[zombie]

Someone here suggested a dremel tool, and a small grinding bit. I think it was B&L

Get a postage scale at Staples/WalMart, and simply shave off a bit of the inside brass core. TINY bits, and check.

[Adept]

Should I be so brave?? I am not sure...

[zombie]

Absolutely! All you are doing is cutting out metal. It is brass, and almost soft enough to cut w/ a sharp knife.

If a dremel tool intimidates you Use a rat tail file. Just file a few strokes, and weigh the slider. You can do it.

[kfc.android]

zombie's got the point, as always

[zombie]

I just figure if you never try THEN you can't do it.

I try to do everything myself. I've been blown up/burned/buried/squashed/thrown/all out flattened/electrocuted/sliced/shot/dragged/trampled/bit/hit/spit at/run over.
 A roller doesn't scare me.

[de dee]

mr. Z sounds like you have been married

[zombie]

    3 times 

[de dee]

 just look up dr, pulley on line they have a good vidio

[kfc.android]

yeah, search dr. pulley slider on youtube and you see lots of related videos.
if you want to see a setp-by-step walkthrough, here's a like to one of the Taiwanese forum. You don't have to understand Chinese to read it, just look at those photo

http://forum.jorsindo.com/thread-2311255-1-1.html

[zombie]

There is also a Picture on every package they sell. Nothing to fear mate!