Dr Pulley 20x12 14GR

[de-dee]

mitsoboshi measures there belts around the outside of the belt, with a soft tape it comes to 1004 mm.,.  when I measured  on the table I got 997 mm. same belt,.

[Cortez]

The belt for our DT is quite expensive, Malossi started selling this year a belt for the DT reference 6115277. So far I have only been able to locate them in Frace for 70 Euros + delivery. You may want to contact Malossi USA and enquire for it as it is half the price of the mitsuboshi.

link:
http://www.scootpieces.com/index.php?&categories_id=24&modeles_id=1436&modeles_type=maxi_scooter&modeles_marque=Kymco&modeles_modele=DINK%20STREET%20DOWNTOWN%20i%20300%204t%20LC

..and will probably fail in 1/3 of the miles.

[jwalz1]

Just ordered a set and thought I would bump the thread.  Got them here for $40 shipped:


http://www.partsforscooters.com/169-290_Dr_Pulley_Roller_Weights?ext=F

[zombie]

Their prices, and shipping are the best I have found. Very good resource.

[Adept]

I saw a video on the youtube. They put 4 heavier, and 4 lighter roller in the variator same time.

What is the point of that?? How do they know which weights are good to combine?
What changes will come out of this (compared to  "one weighted" Pulley rollers)?

[de dee]

   I seen that to,. I think it was a racing team that was trying out differant Wts. to see if they could get higher speeds,. and the Wt spread was 1/2 gram, 

[Adept]

I've just finished the topic.

I see, I need a 14gr roller to my DT.

But I have two question:
- I didn't understand perfectly the two kind of variator matter... I have a 2011/05 bike. How can I know which variator do I have? Does it matter?
- We always talk about the roller weights. Why don't we change the size of the rollers? That is affect just as much as the weight, isn't is?

[de dee]

  you have the same scoot I have,.  the next model is 2012, when you take the variator apart you will see the printing lea-7 or lge5, I have not seen the two parts myself but cortez has mentioned them before, it may be the difference in the ramps, the next order I make I will order one just to see the difference,.    # 2 

[de dee]

   If you check the supply places the only one that fit is 20/12 x wt.s 13,. 14,. 15,. they dont make a 22/12,.   if you find one that makes them let us know,.

[Adept]

  you have the same scoot I have,.  the next model is 2012, when you take the variator apart you will see the printing lea-7 or lge5, I have not seen the two parts myself but cortez has mentioned them before, it may be the difference in the ramps, the next order I make I will order one just to see the difference,.    # 2

But is it matter which variator I have when I will order the rollers? I don't want to take apart just for see the factory number

[de dee]

    it is the same rollers or sliders for both variators ,. 

[Adept]

    it is the same rollers or sliders for both variators ,.

Cool! This is an answer!!

I hurry to order

[de dee]

   adept have you tryed the sliders yet, or are you sssnowed in,. I went to sliders and back to rollers , my problem was a long belt 1010 mm. x 25.2 mm. @ 30 %  new belt is 1004 mm. and my rpm dropped 5 to 600 rpm.  at 100 kmph. I will go back to sliders when it warms up again, looks like we got 6 inches of snow today so far,. should all melt by next week,.

[Adept]

   adept have you tryed the sliders yet, or are you sssnowed in,. I went to sliders and back to rollers , my problem was a long belt 1010 mm. x 25.2 mm. @ 30 %  new belt is 1004 mm. and my rpm dropped 5 to 600 rpm.  at 100 kmph. I will go back to sliders when it warms up again, looks like we got 6 inches of snow today so far,. should all melt by next week,.

I'm not really understood what you wrote about...

[agilebda]

Can anyone give me a link to purchase the Dr. Pulley sliders for my Downtown?

Thanks