Thought I'd show you all what it looks like to have a Bestem top case on the Downtown.
To mount the SR92M base plate you need to remove the standard bolts. I first was not sure how to do it, and asked the mechanic at the dealer.
![](http://farm7.static.flickr.com/6183/6091428994_85f4d32a05.jpg)
Push the plugs towards the centre and you'll be able to stick in a screwdriver or other pick and they pop right out.
The Bestem base needed a little modification by providing new mounting holes.
![](http://farm7.static.flickr.com/6182/6090956089_740037a5d7.jpg)
Thus I ended up painting the whole base in a matching colour to the grab bar.
(Forgot what the colour is that I used (Nissan...), but it's a little lighter then original, GM Pewter might be a better match.)
Used Aluminium duct tape to replace the paper backing.
![](http://farm7.static.flickr.com/6063/6098204807_e7a9ebce0e.jpg)
Wiring up the LED lights was the next chore:
![](http://farm7.static.flickr.com/6065/6098808240_98c64bf7e4.jpg)
I did not wanted to have a loose cable on either the case nor the scooter, thus used two 3.5 mm stereo plugs on both ends to connect.
![](http://farm7.static.flickr.com/6083/6098261329_4f217205a4_m.jpg)
![](http://farm7.static.flickr.com/6069/6098259745_4fd3be2f31_m.jpg)
![](http://farm7.static.flickr.com/6079/6098808732_379c63e45d_m.jpg)
Now the cable can be removed, when not in use.
And this is the end result:
![](http://farm7.static.flickr.com/6084/6090890107_fdb00e1c77.jpg)
![](http://farm7.static.flickr.com/6204/6098202277_d5cbe662d5.jpg)
![](http://farm7.static.flickr.com/6072/6098751598_fe32940a18.jpg)
Lights on:
![](http://farm7.static.flickr.com/6193/6098200383_4396be53ba.jpg)
Brake on:
![](http://farm7.static.flickr.com/6190/6098204509_4ff4229ce8.jpg)
Have Fun
![Grin ;D](https://www.kymcoforum.com/Smileys/default/grin.gif)