Author Topic: Broke the bolts holding my seat to the luggage box hinge... need a fix!  (Read 1158 times)

Sadgasm

  • Newbie
  • *
  • Posts: 2
    • View Profile
I took my seat off and while trying to put it back on I was tightening the bolts on the hinge, they snapped off without much effort (tragic)... One snapped off about a year ago when i tried doing this, now today it happened to the second and last one holding my seat on. Puts me in a bad situation cause it seems the screws are embedded in the plastic. Does anyone know a possible fix for this / do i need to buy a new luggage box.

here is a link to a site that sells the luggage box for about $60 (not counting shipping) anyone know a better site to get this part or a good fix? Any ideas are appreciated thanks!









kanbisk

  • Jr. Member
  • **
  • Posts: 52
    • View Profile
Re: Broke the bolts holding my seat to the luggage box hinge... need a fix!
« Reply #1 on: October 16, 2011, 12:59:40 PM »
what I suggests is drill small hole in the center of the broken bolts (2-3 mm) then use a reverse drill to exract then out.

LATERS
Agility 50 4 stroke 2008

dwnthehatch

  • Newbie
  • *
  • Posts: 18
    • View Profile
Re: Broke the bolts holding my seat to the luggage box hinge... need a fix!
« Reply #2 on: October 18, 2011, 04:24:06 AM »
A Screw Extractor will do the job.

http://www.bimmerboard.com/forums/posts/17946

An Error Has Occurred!

Call to undefined function split()