Author Topic: Enough talking about it, time to do something!  (Read 10737 times)

TANWare

  • Hero Member
  • *****
  • Posts: 552
  • E3.38, RP oil Eng & FD, Dr Pulley 20x12 14 gr
    • View Profile
Re: Enough talking about it, time to do something!
« Reply #30 on: February 23, 2012, 02:34:33 AM »
For cornering I find the engine control fine with the DT300i. The only time it is an issue is super slow turns where you are under 11 MPH and the engine is disengaged from the drive terrain. Would I classify as a sport bike, no, but it is fine for every day riding.

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: Enough talking about it, time to do something!
« Reply #31 on: February 23, 2012, 03:34:06 AM »
Exactly!
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

TANWare

  • Hero Member
  • *****
  • Posts: 552
  • E3.38, RP oil Eng & FD, Dr Pulley 20x12 14 gr
    • View Profile
Re: Enough talking about it, time to do something!
« Reply #32 on: February 23, 2012, 05:10:03 AM »
I actually perfer that it lets go. I have well learned how to feather it in if need be so it is of no real issue. Around town when there is stop and go I can blip it in and coast around. I would guess though this is a personal preference.

The only real thing I would have liked is the apr 10% moer power of the non carb spanish bikes. Such be life, most people do not get to see the extra power. Probably bettr I don't have it as then the wrist would just have to use it and eat that extra fuel...........

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: Enough talking about it, time to do something!
« Reply #33 on: February 24, 2012, 02:43:52 AM »
Always true! Performance=Fuel. I went from 70-80mpg to a stunning 25-30. Not stock anymore! For a $3.50 fill up who cares?


Here they come...
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

Cortez

  • Hero Member
  • *****
  • Posts: 1141
    • View Profile
    • My flickr account
Re: Enough talking about it, time to do something!
« Reply #34 on: February 24, 2012, 03:06:11 PM »
I'm still waiting for my DT300 to get better MPG figures then my Kawasaki with more then twice the power..
so power doesn't equal fuel here.. not yet at least..
 ;D
'08 FZ6n S2 ABS

SOLD: 2003 Peugeot Speedfight2 LC, 2007 Kawasaki ER-6F ABS, 2006 Kymco Agility 125, '12 Kymco Downtown 300i ABS,

TANWare

  • Hero Member
  • *****
  • Posts: 552
  • E3.38, RP oil Eng & FD, Dr Pulley 20x12 14 gr
    • View Profile
Re: Enough talking about it, time to do something!
« Reply #35 on: February 24, 2012, 05:21:41 PM »
It isn't the total power but power used. Scooters by default use up, or should I waste, more power in the trany etc..............

axy

  • Hero Member
  • *****
  • Posts: 2210
    • View Profile
Re: Enough talking about it, time to do something!
« Reply #36 on: February 24, 2012, 06:13:50 PM »
For cornering I find the engine control fine with the DT300i. The only time it is an issue is super slow turns where you are under 11 MPH and the engine is disengaged from the drive terrain. Would I classify as a sport bike, no, but it is fine for every day riding.

Vehicles on two tires as a mechanical system are inherently unstable at low speed and especially below 6 mph/10 km/h.
Main reason for this is the fact that gyroscopic effect of spinning wheels is not sufficient enough to provide for enhanced lateral and longitudinal stability.
No bike is good for slow turns at that speed, some are better than other but only marginally. :) Or the sitting position, angles etc. provide for better control.
---
Kymco People GT300i 2017 ABS Euro4
Kymco Agility 125 2008

(Past: Kymco People 250S, Piaggio Beverly 200, Kawasaki ZR-7S, Yamaha TW125, Kymco Cobra Cross 50, Peugeot Zenith 50, Piaggio NRG 50 mc2 72 cc Naraku kit)

axy

  • Hero Member
  • *****
  • Posts: 2210
    • View Profile
Re: Enough talking about it, time to do something!
« Reply #37 on: February 24, 2012, 06:17:00 PM »
I'm still waiting for my DT300 to get better MPG figures then my Kawasaki with more then twice the power..
so power doesn't equal fuel here.. not yet at least..
 ;D

I have managed 3.8 l/100 km with my ZR-7S when it was stock.
A friend of mine has Fazer 800 and he did also 3.8 l/100 km single up driving between 100 and 120 km/h in top gear on open road.

This is comparable to 125cc scoots which is quite incredible. I would be willing to bet that 125 cc at top speed would consume more.

Four cyl bikes are very fuel efficient, 2 cyl less, thumpers the least...
---
Kymco People GT300i 2017 ABS Euro4
Kymco Agility 125 2008

(Past: Kymco People 250S, Piaggio Beverly 200, Kawasaki ZR-7S, Yamaha TW125, Kymco Cobra Cross 50, Peugeot Zenith 50, Piaggio NRG 50 mc2 72 cc Naraku kit)

Cortez

  • Hero Member
  • *****
  • Posts: 1141
    • View Profile
    • My flickr account
Re: Enough talking about it, time to do something!
« Reply #38 on: February 24, 2012, 06:21:46 PM »
I have managed 3.8 l/100 km with my ZR-7S when it was stock.
A friend of mine has Fazer 800 and he did also 3.8 l/100 km single up driving between 100 and 120 km/h in top gear on open road.

This is comparable to 125cc scoots which is quite incredible. I would be willing to bet that 125 cc at top speed would consume more.

Four cyl bikes are very fuel efficient, 2 cyl less, thumpers the least...

My 2cyl ER6F averaged between 4.0 and 4.5l/100km around town and usually no more then 4.0l/100km when traveling, loaded
up, usually between 100 and 110 like you wrote above. Lower displacement 4 cyl bikes can be thirsty (like the fazer 600,
hornet 600 etc) since they got no torque down low.
'08 FZ6n S2 ABS

SOLD: 2003 Peugeot Speedfight2 LC, 2007 Kawasaki ER-6F ABS, 2006 Kymco Agility 125, '12 Kymco Downtown 300i ABS,

axy

  • Hero Member
  • *****
  • Posts: 2210
    • View Profile
Re: Enough talking about it, time to do something!
« Reply #39 on: February 24, 2012, 06:44:03 PM »
My 2cyl ER6F averaged between 4.0 and 4.5l/100km around town and usually no more then 4.0l/100km when traveling, loaded
up, usually between 100 and 110 like you wrote above. Lower displacement 4 cyl bikes can be thirsty (like the fazer 600,
hornet 600 etc) since they got no torque down low.

To chug along you don't need it. FZ600S can do <4l/100 kms too.

If you drive any 600 like semi-tard and carelessly, it will consume in vicinity of 5.5 l/100 km, including all out on highways.

My P250S currently consumes >5 l/100 km when driving quite carefully, 60-80 km/h, no higway. It used to hover at -25% off that, have no idea what happened.
---
Kymco People GT300i 2017 ABS Euro4
Kymco Agility 125 2008

(Past: Kymco People 250S, Piaggio Beverly 200, Kawasaki ZR-7S, Yamaha TW125, Kymco Cobra Cross 50, Peugeot Zenith 50, Piaggio NRG 50 mc2 72 cc Naraku kit)

TANWare

  • Hero Member
  • *****
  • Posts: 552
  • E3.38, RP oil Eng & FD, Dr Pulley 20x12 14 gr
    • View Profile
Re: Enough talking about it, time to do something!
« Reply #40 on: February 24, 2012, 08:18:51 PM »
so far I seem to be 3.3L/100km so I am happy...................

Cortez

  • Hero Member
  • *****
  • Posts: 1141
    • View Profile
    • My flickr account
Re: Enough talking about it, time to do something!
« Reply #41 on: February 24, 2012, 09:57:04 PM »
To chug along you don't need it. FZ600S can do <4l/100 kms too.

If you drive any 600 like semi-tard and carelessly, it will consume in vicinity of 5.5 l/100 km, including all out on highways.

My P250S currently consumes >5 l/100 km when driving quite carefully, 60-80 km/h, no higway. It used to hover at -25% off that, have no idea what happened.

Ever cleaned the carb?
(Dizne se zacepe isto.. sve dize potrosnju).
'08 FZ6n S2 ABS

SOLD: 2003 Peugeot Speedfight2 LC, 2007 Kawasaki ER-6F ABS, 2006 Kymco Agility 125, '12 Kymco Downtown 300i ABS,

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: Enough talking about it, time to do something!
« Reply #42 on: February 24, 2012, 10:03:47 PM »
It isn't the total power but power used. Scooters by default use up, or should I waste, more power in the trany etc..............
That is why I brought up the control spring. The stock cvt's are very inefficient in relaying power. It is amazing the difference a spring makes. (well that is what controls the power delivery after all.). The biggest difference I find between scoots, and bikes is the ability to control the engine. Scoots depend on spring rate/roller weight to deliver their power (not a manual clutch), and MUST have shall we say "limp" power delivery to keep from killing people.
Once you UNDERSTAND how it works it is easy to tune. Pick a direction you desire, and install the part that get you there. More rpm's= lighter rollers, having the engine/clutch stay engaged at lower rpm's-stiffer= control spring.
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

Cortez

  • Hero Member
  • *****
  • Posts: 1141
    • View Profile
    • My flickr account
Re: Enough talking about it, time to do something!
« Reply #43 on: February 24, 2012, 10:06:35 PM »
so far I seem to be 3.3L/100km so I am happy...................

I got about 35% more at the moment..  >:(
'08 FZ6n S2 ABS

SOLD: 2003 Peugeot Speedfight2 LC, 2007 Kawasaki ER-6F ABS, 2006 Kymco Agility 125, '12 Kymco Downtown 300i ABS,

TANWare

  • Hero Member
  • *****
  • Posts: 552
  • E3.38, RP oil Eng & FD, Dr Pulley 20x12 14 gr
    • View Profile
Re: Enough talking about it, time to do something!
« Reply #44 on: February 25, 2012, 04:15:37 AM »
My first tank was horrid too. I thingk what ever fuel and stabizing agents they used etc. caused horrid milage. My other mild mods helped MG as well, a good synthetic in the engine and FD along with the Irridum plug.

If you go by Fuelly I get towrds the top of the MPG range...............

An Error Has Occurred!

Call to undefined function split()