KymcoForum.com
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email
?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Welcome Kymco Owners!
Home
Help
Search
Login
Register
KymcoForum.com
»
Scooters - 125 to 300
»
Downtown 300
»
DTi 300 screen
« previous
next »
Print
Pages: [
1
]
Author
Topic: DTi 300 screen (Read 2194 times)
captainA
Newbie
Posts: 2
DTi 300 screen
«
on:
March 04, 2012, 10:43:15 AM »
Hi - I've read quite a few posts about the standard screen and the bad - for me at least - buffeting around the helmet. I'm 6' and I wondered if anyone my height has bought the Puig shorter screen and what your findings are ? Also has anyone my height bought the Givi taller screen and what's that like (e.g. can you still see over it ?)
Ta
Logged
oldcoastie
Jr. Member
Posts: 64
Re: DTi 300 screen
«
Reply #1 on:
March 04, 2012, 09:38:50 PM »
I'm not going to be much help to you, Captain... I'm about 5'3" and the stock screen is as perfect as it could be for quiet and no buffeting. I can ride with my face shield open and it doesn't even whistle...
But my Grand Vista's shield was short and so I can sympathize with the issue... if it were me, I'd try the taller shield but I get cold easily and like the protection.
Logged
Syl
Sr. Member
Posts: 450
Re: DTi 300 screen
«
Reply #2 on:
March 04, 2012, 10:33:49 PM »
oldcoastie... I am 6' 1", 245 and I use the windshield that came with the 300i and purchased now my second Fulmer Helmet 9B or AF-9B ISHADE. I wanted to purchase a full face helmet initially but I didn't like the restricted breathing for me. The 9B has a daylight shade and a 3/4 clear pull down over top that and this is enough for me to look over top the windshield and have mask & windshield giving me all the air blockage I need. I also like the air vent slider on it and silver for hot summer days.
Logged
TANWare
Hero Member
Posts: 552
E3.38, RP oil Eng & FD, Dr Pulley 20x12 14 gr
Re: DTi 300 screen
«
Reply #3 on:
March 05, 2012, 01:36:24 PM »
The GIVI tall is over 6" taller. I doubt, without cutting, you will see over the top of it. There is another out there with a shorter top, I think it was 4", now that could stand a chance but it doesn't have the amount of the GIVI's hand protection.
Logged
Syl
Sr. Member
Posts: 450
Re: DTi 300 screen
«
Reply #4 on:
March 05, 2012, 04:59:45 PM »
captainA... have you come up with anything suitable yet, I'm curious. I read on here about changes the owners make and wonder what their final analysis is. Appears there are a good bit of new 300i owners.
Logged
wheels
Full Member
Posts: 112
USA, NC, Raleigh
Re: DTi 300 screen
«
Reply #5 on:
March 09, 2012, 03:04:01 PM »
I got the tall Givi, it offers more protection and reduced buffeting (not eliminated) and I am only 5'6".
I cut about 4" off the top because I prefer to look just over the top of the screen, therefore I increased the buffeting somewhat. Its the design of the fairing and rake of the windshield that causes most of the issues.
IMO, the fairing should come back to at least the top of the instrument pod then have a shorter windshield more upright that could be manually adjusted for height. The design needs to be like the Honda ST1300. I say this because I had a Burgman 650 Exec with the adjustable screen .... same poor design.
Logged
2012 DT 300i 26K miles, Bestem 929, Biondi w/s, LED brake/tail,turn, OEM mirrors fairing mount, removed buttstop
2015 GTi300 7K miles, Bestem 929 case, PUIG TS w/s, mirrors mounted to w/s, led DRLs in windguards
2014 Honda CTX700, 35Kmiles, many mods
An Error Has Occurred!
Call to undefined function split()
Back