Well i already tried an 88 and that was way too lean and it just bogged down as soon as i tried to open the throttle.
I'LL see how the 94/96/98 runs, reckon it MUST be one of them.
Going to look for a jet kit tomorrow at work cos its too late here now, im up in 6hrs for work
Let you know how it goes.
I want to try find a 736 or 737 x 17.5 x 30 belt. My Malossi kevlar was 17.5 wide and worked well till it started turning to dust. Tried a rubber belt the same only 17.7 wide and it wasnt the same.
I replaced my complete rear pulley assemebly last year and i think it may be slightly narrower at the bottom range than my old one so that 0,2mm is making a difference. Im sure i feel it hit 70km/hr then its like the belt is trying to get down to the bottom so i stop accelerating then it slips in and i go accelerate and can go faster.
Sure thats my issue so plan on putting an order in tomorrow and doing some testing at the weekend..
Btw when i order jets i always ask for keihin jets M5 or 5mm thread they always fit. I got others that say 5mm but the thread pitch was different and they dont fit.
