« previous next »
Pages: [1]

Author Topic: VARIATOR NUT  (Read 3392 times)

REDKYMCO

  • Full Member
  • ***
  • Posts: 142
    • View Profile
VARIATOR NUT
« on: April 03, 2012, 02:15:51 PM »
Im going to buy a impact wrench so i can change my own drive belts etc as i will use it very little i just want something cheap do you think this 12v one will be upto the job   http://www.ebay.co.uk/itm/1-2-12V-Impact-Wrench-Kit-350Nm-RAC-038-2364-12-VOLT-/120869215922?pt=UK_Home_Garden_PowerTools_SM&hash=item1c245ddeb2

only problem i will have is providing the 12v power im wondering if the agility battery would provide the power as i have no use of a car as a power source and if i have to go out and buy a battery charger or car battery to power it then it may just be easier to go for this mains powerd one below only thing is its twice the price for a item i will use very little and may be to powerfull when tightening the nut back up 

http://www.ebay.co.uk/itm/Clarke-1-2-Drive-1kw-CEW1000-Electric-Impact-Wrench-240-V-Heavy-Duty-Sockets-/320881863133?pt=UK_Home_Garden_PowerTools_SM&hash=item4ab60ca9dd

Also does anyone know what size the variator nut is as the impact wrenches come provided with a couple of sockets thank you for any help advice.....
Logged
IF IT IS NOT BROKE DONT FIX IT:)

streido

  • Hero Member
  • *****
  • Posts: 3072
  • I view speed limits as guidelines rather than laws
    • View Profile
Re: VARIATOR NUT
« Reply #1 on: April 03, 2012, 05:57:45 PM »
The 1st RAC one is the one i bought about a yr ago and its pretty good, i have no complaints really with it. It has a socket to fit the variator nut in the box but not one for the clutch nut. I just use a normal socket for the clutch and its been fine. Like you say tho its only 12v and NO your agility battery wont power it, well mine wont even if i run the scoot. I connect my car battery charger leads to the leads for the wrench. and then i can power it off the mains.

If you dont have a charger to power it you may still be cheaper buying a cheap 12v car charger and the RAC one?
Logged
Chaos is my co-pilot.

REDKYMCO

  • Full Member
  • ***
  • Posts: 142
    • View Profile
Re: VARIATOR NUT
« Reply #2 on: April 03, 2012, 07:45:43 PM »
Thanks streido what amp is your car charger wilkinsons sell a 3 amp car charger which is the cheapest around or do you think i will need a higher amp charger....
Logged
IF IT IS NOT BROKE DONT FIX IT:)

streido

  • Hero Member
  • *****
  • Posts: 3072
  • I view speed limits as guidelines rather than laws
    • View Profile
Re: VARIATOR NUT
« Reply #3 on: April 03, 2012, 11:21:17 PM »
The charger i use was a pretty cheap one similair to this http://www.argos.co.uk/static/Product/partNumber/7404355.htm but im not sure on the amps. If im in the garage tomorrow ill take a look.

Logged
Chaos is my co-pilot.

greagle

  • Jr. Member
  • **
  • Posts: 65
    • View Profile
Re: VARIATOR NUT
« Reply #4 on: April 12, 2012, 01:49:46 AM »
this is how I take off the variator nut, learned it from this video alone --> 
Logged

blue

  • Hero Member
  • *****
  • Posts: 3935
    • View Profile
Re: VARIATOR NUT
« Reply #5 on: April 12, 2012, 02:03:06 AM »
x 2 works great I keep theam tools under the seat of the scoot just to have with me all the time.
Logged

blue

  • Hero Member
  • *****
  • Posts: 3935
    • View Profile
Re: VARIATOR NUT
« Reply #6 on: April 12, 2012, 02:04:27 AM »
works good on the clutch also but you need a big long handle allen wrench.
Logged

streido

  • Hero Member
  • *****
  • Posts: 3072
  • I view speed limits as guidelines rather than laws
    • View Profile
Re: VARIATOR NUT
« Reply #7 on: April 12, 2012, 07:33:04 AM »
I tried greagles method but it didnt work. Think if you already had the nut off before it may be ok but it would not budge my nut at all so i got the impact wrench.

This post just reminded me that i was meant to let u know about my charger kisbee, mine is a upto 6amp charger.
Logged
Chaos is my co-pilot.

baddi

  • Sr. Member
  • ****
  • Posts: 498
  • Top speed: 38 km/h and fuel economy: 50 km/l
    • View Profile
    • My project fuel injection gallery
Re: VARIATOR NUT
« Reply #8 on: April 12, 2012, 08:11:28 AM »
Quote from: greagle on April 12, 2012, 01:49:46 AM
this is how I take off the variator nut, learned it from this video alone --> 

The guy in the video has a Kymco Super 8, and are the wisest guy in scooters in Denmark.

This is his site: http://scootergrisen.dk/ It can be translated to english in the right side (but im unsure how precise it is), and he have collected nearly anything there is to know about scooters, and he have great pictures and illustrations of everything. :D
Logged
First Kymco agility 50 (2008) 11.000+ km (dead)
Second kymco agility 50 (2010) 20.000+ km. Project Fuel Injection. Stolen.
Kymco K-pipe 125 (2014) 7400 km.

REDKYMCO

  • Full Member
  • ***
  • Posts: 142
    • View Profile
Re: VARIATOR NUT
« Reply #9 on: April 15, 2012, 03:32:16 PM »
This is the impact wrench i went for i thought it was a bargain price at £19 with delivery just hope its up to the job now just got to get a 12v supply to power it....

http://www.ebay.co.uk/itm/140738506470?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
« Last Edit: April 15, 2012, 03:34:53 PM by kisbee »
Logged
IF IT IS NOT BROKE DONT FIX IT:)

wordslinger

  • Hero Member
  • *****
  • Posts: 10766
  • undead primate
    • View Profile
Re: VARIATOR NUT
« Reply #10 on: April 15, 2012, 08:27:06 PM »
...i use this...
Logged
..every mod (action) necessitates a (reaction) mod..

An Error Has Occurred!

Call to undefined function split()
Back