« previous next »
Pages: 1 2 [3] 4

Author Topic: Who cut my cdi?  (Read 7965 times)

streido

  • Hero Member
  • *****
  • Posts: 3072
  • I view speed limits as guidelines rather than laws
    • View Profile
Re: Who cut my cdi?
« Reply #30 on: April 23, 2012, 09:57:15 PM »
Quote from: wordslinger on April 23, 2012, 09:49:12 PM
...the rubber "PCV" effect tube, attached to the valve cover does indeed go to the oem airbox...

..just opposite of where it enters, there is a clear tube, that routes beneath the aibox toward the rear..

..the venturi effect does "draw" oil vapor from the valve cover, and the vapor condenses in this space between the two tubes...

..that oil should be drained from the clear tubing periodically...

Yeah but the oily stuff still also collects in our stock airbox, mine on the back bottom corner. Dont know if its linked to these tubes? I just asumed it was vapour from the engine oil that returned thro the carb, into the thro the air intake pipe to the filter box and was condensing?

I noticed when ive been jetting that once you stop if you remove the carb then oil vapour comes out the manifold when its just been run and stopped.
« Last Edit: April 23, 2012, 09:58:53 PM by streido »
Logged
Chaos is my co-pilot.

wordslinger

  • Hero Member
  • *****
  • Posts: 10766
  • undead primate
    • View Profile
Re: Who cut my cdi?
« Reply #31 on: April 23, 2012, 10:03:21 PM »
...there shouldn be any oil from the carb intake, but theres gasoline vapor that get's dopplered out and condenses, with some of the oil vapor from tubing...
Logged
..every mod (action) necessitates a (reaction) mod..

streido

  • Hero Member
  • *****
  • Posts: 3072
  • I view speed limits as guidelines rather than laws
    • View Profile
Re: Who cut my cdi?
« Reply #32 on: April 23, 2012, 10:12:18 PM »
Quote from: wordslinger on April 23, 2012, 10:03:21 PM
...there shouldn be any oil from the carb intake, but theres gasoline vapor that get's dopplered out and condenses, with some of the oil vapor from tubing...


Oil? Did i say oil? I meant gas  :-[

Yeah thats all it is im sure.
Logged
Chaos is my co-pilot.

wordslinger

  • Hero Member
  • *****
  • Posts: 10766
  • undead primate
    • View Profile
Re: Who cut my cdi?
« Reply #33 on: April 23, 2012, 10:17:29 PM »
vapour comes out the manifold when its just been run and stopped.


..there's a link here somewhere that shows an awesome demonstration of how theres a vapor cloud there while its running...

..cant find itt....
Logged
..every mod (action) necessitates a (reaction) mod..

whiteknight

  • Hero Member
  • *****
  • Posts: 783
  • ..Knight Tweed..
    • View Profile
Re: Who cut my cdi?
« Reply #34 on: April 23, 2012, 10:27:19 PM »
Quote from: wordslinger on April 23, 2012, 08:59:55 PM
...what's your cvt setup, whiteknight?

racing variator (cant remember the weights i used) 1500rpm clutch spring smooth drive boss and a racing cdi.

Quote from: baddi on April 23, 2012, 09:23:22 PM
I think it might be because the tube from the valve cover leads it to the air filter, where it because of venturi effect is sucked up into the air flow to lubricate the engine from the ignition side of the piston. :D
But just a guess. ;)

FU*K!! i know what tube your on about!! that lil bastid came off and was rubbing and got chewed by the rear wheel. i did post quite a while about it and i knew it came from the head of the engine, i just tucked it up so it didnt get chewed anymore.
Logged
Courage is measured in how much tyre you use.

2010 Kymco Agility 72..Naraku 72cc race cylinder...Naraku 50cc race head
Naraku Race CDi...Polini free flow filter...Motoforce Racing Carb
NGK Irirdium plug...Naraku Race Variator...Malossi fly clutch
Stage 6 cnc clutch bell...1500 Rpm torque sprin

wordslinger

  • Hero Member
  • *****
  • Posts: 10766
  • undead primate
    • View Profile
Re: Who cut my cdi?
« Reply #35 on: April 23, 2012, 10:33:00 PM »
...how old is your belt?

..i've been running with that tube tucked for 3 years..it's what you do, when runnin k&n filter...don't sweat it...
Logged
..every mod (action) necessitates a (reaction) mod..

whiteknight

  • Hero Member
  • *****
  • Posts: 783
  • ..Knight Tweed..
    • View Profile
Re: Who cut my cdi?
« Reply #36 on: April 23, 2012, 10:55:57 PM »
Quote from: wordslinger on April 23, 2012, 10:33:00 PM
...how old is your belt?

..i've been running with that tube tucked for 3 years..it's what you do, when runnin k&n filter...don't sweat it...

my belt?? ermmm well... nearing 14,000
Logged
Courage is measured in how much tyre you use.

2010 Kymco Agility 72..Naraku 72cc race cylinder...Naraku 50cc race head
Naraku Race CDi...Polini free flow filter...Motoforce Racing Carb
NGK Irirdium plug...Naraku Race Variator...Malossi fly clutch
Stage 6 cnc clutch bell...1500 Rpm torque sprin

wordslinger

  • Hero Member
  • *****
  • Posts: 10766
  • undead primate
    • View Profile
Re: Who cut my cdi?
« Reply #37 on: April 23, 2012, 10:58:57 PM »
...could be an issue...wouldnt hurt if you replaced it...wouldnt hurt at all!!
Logged
..every mod (action) necessitates a (reaction) mod..

thebatman

  • Hero Member
  • *****
  • Posts: 2432
  • The Bat lives on... like the fkn Energizer Bunny
    • View Profile
Re: Who cut my cdi?
« Reply #38 on: April 23, 2012, 11:04:25 PM »
my belt?? ermmm well... nearing 14,000

Dam that a lot of miles.... :o
Logged
"THE BAT"MAN...
Says:
"A goal without a plan is just a dream"......

wordslinger

  • Hero Member
  • *****
  • Posts: 10766
  • undead primate
    • View Profile
Re: Who cut my cdi?
« Reply #39 on: April 23, 2012, 11:11:51 PM »
...think hes sayin kms...still, thatsa lot...

..especially with race vari anda 1500 contra...
Logged
..every mod (action) necessitates a (reaction) mod..

thebatman

  • Hero Member
  • *****
  • Posts: 2432
  • The Bat lives on... like the fkn Energizer Bunny
    • View Profile
Re: Who cut my cdi?
« Reply #40 on: April 23, 2012, 11:31:01 PM »
...think hes sayin kms

DE-DE-DEEE...Guess your right on that one.... ::)
WE measure that over here... :D
14,000Kms come to like 8700miles
Logged
"THE BAT"MAN...
Says:
"A goal without a plan is just a dream"......

baddi

  • Sr. Member
  • ****
  • Posts: 498
  • Top speed: 38 km/h and fuel economy: 50 km/l
    • View Profile
    • My project fuel injection gallery
Re: Who cut my cdi?
« Reply #41 on: April 24, 2012, 08:10:24 AM »
Quote from: wordslinger on April 23, 2012, 09:49:12 PM
...the rubber "PCV" effect tube, attached to the valve cover does indeed go to the oem airbox...

..just opposite of where it enters, there is a clear tube, that routes beneath the aibox toward the rear..

..the venturi effect does "draw" oil vapor from the valve cover, and the vapor condenses in this space between the two tubes...

..that oil should be drained from the clear tubing periodically...

Here is the hole witch goes down to the pvc tube from the valve cover. Beneath it is a sponge, and the oily stuff from the valve cover is collected here and then sucked up into the air stream, where it will lubricate the engine and valves from the combustion side. :)
Problably prolongs engine life or something. :D
Logged
First Kymco agility 50 (2008) 11.000+ km (dead)
Second kymco agility 50 (2010) 20.000+ km. Project Fuel Injection. Stolen.
Kymco K-pipe 125 (2014) 7400 km.

whiteknight

  • Hero Member
  • *****
  • Posts: 783
  • ..Knight Tweed..
    • View Profile
Re: Who cut my cdi?
« Reply #42 on: April 24, 2012, 09:43:36 AM »
Quote from: thebatman on April 23, 2012, 11:31:01 PM
...think hes sayin kms

DE-DE-DEEE...Guess your right on that one.... ::)
WE measure that over here... :D
14,000Kms come to like 8700miles

im not sure but i think my odometer is reading miles. so i think i have done 14,000 miles. i would be checking everything but it seems that i work, work, work then speand a hell of a lot of time sleeping.
Logged
Courage is measured in how much tyre you use.

2010 Kymco Agility 72..Naraku 72cc race cylinder...Naraku 50cc race head
Naraku Race CDi...Polini free flow filter...Motoforce Racing Carb
NGK Irirdium plug...Naraku Race Variator...Malossi fly clutch
Stage 6 cnc clutch bell...1500 Rpm torque sprin

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: Who cut my cdi?
« Reply #43 on: April 25, 2012, 02:00:30 AM »
That's Crazy... Most scoots here read KM's. Backwards shipping.
Logged
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

baddi

  • Sr. Member
  • ****
  • Posts: 498
  • Top speed: 38 km/h and fuel economy: 50 km/l
    • View Profile
    • My project fuel injection gallery
Re: Who cut my cdi?
« Reply #44 on: April 25, 2012, 08:33:21 AM »
Quote from: whiteknight on April 24, 2012, 09:43:36 AM
im not sure but i think my odometer is reading miles. so i think i have done 14,000 miles. i would be checking everything but it seems that i work, work, work then speand a hell of a lot of time sleeping.

The standart is that it is measured in Km, as this is the international standart and because it is what engeneers uses the most. :D
In my manual it sais odometer and speedometer in km, and then that they as a kind of service for you guys have written mph on the speedometer too. :)
Logged
First Kymco agility 50 (2008) 11.000+ km (dead)
Second kymco agility 50 (2010) 20.000+ km. Project Fuel Injection. Stolen.
Kymco K-pipe 125 (2014) 7400 km.

An Error Has Occurred!

Call to undefined function split()
Back