« previous next »
Pages: [1] 2

Author Topic: speed needed  (Read 3112 times)

stevenk24

  • Newbie
  • *
  • Posts: 43
    • View Profile
speed needed
« on: May 13, 2012, 09:58:54 PM »
mine gose 43 done cdi and drive boss i think it was done but i want more speed any help ??
Logged

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: speed needed
« Reply #1 on: May 13, 2012, 10:13:36 PM »
Read thru Every Thing Wordslinger posted from 3 years ago on. Tuning the cvt is your next big improvement area. Contra spring (1500), and a Good Var will get you close to 50 if everything else is working well. Not much more than that to be had actually. 50 is a doable goal on the agility.
Logged
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

juice

  • Hero Member
  • *****
  • Posts: 668
    • View Profile
Re: speed needed
« Reply #2 on: May 13, 2012, 11:05:11 PM »
You have NEVER been even slightly satisfied with your a50 , and I don't think you would be if you were able to attain 50mph . So if you need more speed get a larger machine , JMO .
Logged

blue

  • Hero Member
  • *****
  • Posts: 3935
    • View Profile
Re: speed needed
« Reply #3 on: May 13, 2012, 11:06:08 PM »
mine did do 43 now it struggles to get there. after time everything wears out and the scoot well get slower. only thing I can do now is get the big clutch spring. and keep up on the rollers.
Logged

wordslinger

  • Hero Member
  • *****
  • Posts: 10766
  • undead primate
    • View Profile
Re: speed needed
« Reply #4 on: May 15, 2012, 03:18:24 AM »
Read thru Every Thing Wordslinger posted from 3 years ago on


..dang....that's gonna take a while.....


..start with 40lbs of air in your tires..adjust your valves to .04mm

..yank that airbox off your scoot, and put on a K&N filter...

..get ready to pull your hair out as you jet and re-jet and modify your needle and it's retaining clip, cause you really need to do that for good mid-throttle...and buy a bunch of plugs..

..skip the blown-air induction, unless you're adventurous...   8)

..and dont even read the exhaust mod stuff....


..change the oil...put inna malossi multivar with 5.5grams or less..yup, a 1500 contra and some 1000 flys...

..from there...well, who really knows??


           :-*
Logged
..every mod (action) necessitates a (reaction) mod..

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: speed needed
« Reply #5 on: May 15, 2012, 06:26:05 AM »
Man... Three years of Ag posts put into three paragraphs. I guess there is a lot of wasted space...
My ZX sh** would be...
Don't bother brother!

3 words.
Logged
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

blue

  • Hero Member
  • *****
  • Posts: 3935
    • View Profile
Re: speed needed
« Reply #6 on: May 15, 2012, 01:44:37 PM »
Quote from: zombie on May 15, 2012, 06:26:05 AM
Man... Three years of Ag posts put into three paragraphs. I guess there is a lot of wasted space...
My ZX sh** would be...
Don't bother brother!

3 words.
  3 words well do.................GET BIGGER SCOOT.......................
Logged

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: speed needed
« Reply #7 on: May 16, 2012, 01:07:35 AM »
Get NEWER Scoot... I have parts from Every F'n country EXCEPT USA/Russia.
It takes WEEKS to get spark plugs!

Taiwan: Engine case/frame/wheels/suspension/spark plugs
Italy: Cylinder/tires/fork springs/bushings/gear sets/rollers/clutch/Ign coil
Japan: Piston/bearings/varaitor/torque drive set/2 pipes
Philippines: 1 pipe
USA: MSD cdi
China? All their sh** is in the trash.
Logged
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

thebatman

  • Hero Member
  • *****
  • Posts: 2432
  • The Bat lives on... like the fkn Energizer Bunny
    • View Profile
Re: speed needed
« Reply #8 on: May 16, 2012, 01:11:29 AM »
It takes WEEKS to get spark plugs!

Dam,, what plugs you buying?
I run down to the local Napa Auto parts and by my mines.............usually. (they were out for a cpl weeks)
Logged
"THE BAT"MAN...
Says:
"A goal without a plan is just a dream"......

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: speed needed
« Reply #9 on: May 16, 2012, 01:21:13 AM »
NGK BR9HSA  They are not sold in the US. I can't figure why? I have to get them from Jiangwayne...24.95 for six shipped.
Logged
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

wordslinger

  • Hero Member
  • *****
  • Posts: 10766
  • undead primate
    • View Profile
Re: speed needed
« Reply #10 on: May 16, 2012, 01:29:48 AM »
..i know.....advance auto never heard of'm...not in their database...

Logged
..every mod (action) necessitates a (reaction) mod..

thebatman

  • Hero Member
  • *****
  • Posts: 2432
  • The Bat lives on... like the fkn Energizer Bunny
    • View Profile
Re: speed needed
« Reply #11 on: May 16, 2012, 01:32:30 AM »
NGK BR9HSA  They are not sold in the US

I need to go look at the last i bought. I'd SWEAR i bought those..... unless it's the HS i had gotten and not the HSA..
Dam, what did i do wit em?...hmmmm....



OOPS.... My bad... yep, mine are the HS bought local
Logged
"THE BAT"MAN...
Says:
"A goal without a plan is just a dream"......

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: speed needed
« Reply #12 on: May 16, 2012, 01:38:51 AM »
YUP! The HS is a standard Outboard plug...
Logged
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

wordslinger

  • Hero Member
  • *****
  • Posts: 10766
  • undead primate
    • View Profile
Re: speed needed
« Reply #13 on: May 16, 2012, 01:47:14 AM »
...the hs is shorter...more ccs!!...lmao...
Logged
..every mod (action) necessitates a (reaction) mod..

baddi

  • Sr. Member
  • ****
  • Posts: 498
  • Top speed: 38 km/h and fuel economy: 50 km/l
    • View Profile
    • My project fuel injection gallery
Re: speed needed
« Reply #14 on: May 16, 2012, 09:23:47 AM »
Quote from: wordslinger on May 16, 2012, 01:47:14 AM
...the hs is shorter...more ccs!!...lmao...

The displacement is the same, but the compression is lower, when there are more room in the combustion chamber. :D
Logged
First Kymco agility 50 (2008) 11.000+ km (dead)
Second kymco agility 50 (2010) 20.000+ km. Project Fuel Injection. Stolen.
Kymco K-pipe 125 (2014) 7400 km.

An Error Has Occurred!

Call to undefined function split()
Back