« previous next »
Pages: [1]

Author Topic: Checking the valve clearance  (Read 1105 times)

08087

  • 09' Peoples 200, NJ
  • Hero Member
  • *****
  • Posts: 1373
    • View Profile
Checking the valve clearance
« on: June 23, 2012, 07:12:21 PM »
I'm not very handy, but I was going over my owners manual the other night and it says to check the valve cleanses every so often. How does one go about doing this?
Logged
This posting is provided “AS IS” with no warranties either expressed or written and confers no rights. You assume all risk for your use, the author is not responsible for your inability to understand logic, ambiguous references, sarcasm, the imaginary friends living inside my head or William Shatner

blue

  • Hero Member
  • *****
  • Posts: 3935
    • View Profile
Re: Checking the valve clearance
« Reply #1 on: June 23, 2012, 07:17:07 PM »
any thing you need to know about how to do something can be found on youtube comes in handy.
Logged

whiteknight

  • Hero Member
  • *****
  • Posts: 783
  • ..Knight Tweed..
    • View Profile
Re: Checking the valve clearance
« Reply #2 on: June 23, 2012, 07:21:29 PM »
or even better search on here for it. but then if it aint here do what blue said and do a youtube search.
Logged
Courage is measured in how much tyre you use.

2010 Kymco Agility 72..Naraku 72cc race cylinder...Naraku 50cc race head
Naraku Race CDi...Polini free flow filter...Motoforce Racing Carb
NGK Irirdium plug...Naraku Race Variator...Malossi fly clutch
Stage 6 cnc clutch bell...1500 Rpm torque sprin

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7764
  • West Tennessee, USA
    • View Profile
Re: Checking the valve clearance
« Reply #3 on: June 23, 2012, 08:44:39 PM »
There is a post on here somewhere that said take out the seat tub and remove the "tupperware" plastic forward of the tub to gain access. That gives you plenty of working room. Feeler gages and metric wrenches is about it. You may want to pull the spark plug to make it easier to turn the engine to get the cams to the base circle to check/adjust. Get one of the wrench-heads to show you if you never have done this before OR as someone already said, YOUTUBE!

Karl
Logged
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

08087

  • 09' Peoples 200, NJ
  • Hero Member
  • *****
  • Posts: 1373
    • View Profile
Re: Checking the valve clearance
« Reply #4 on: June 23, 2012, 08:55:03 PM »
Quote from: CROSSBOLT on June 23, 2012, 08:44:39 PM
There is a post on here somewhere that said take out the seat tub and remove the "tupperware" plastic forward of the tub to gain access. That gives you plenty of working room. Feeler gages and metric wrenches is about it. You may want to pull the spark plug to make it easier to turn the engine to get the cams to the base circle to check/adjust. Get one of the wrench-heads to show you if you never have done this before OR as someone already said, YOUTUBE!

Karl

When I get some time I'll give youtube a shot. I don't have the tool you mentioned so I may just have to have someone do it for me.
Logged
This posting is provided “AS IS” with no warranties either expressed or written and confers no rights. You assume all risk for your use, the author is not responsible for your inability to understand logic, ambiguous references, sarcasm, the imaginary friends living inside my head or William Shatner

An Error Has Occurred!

Call to undefined function split()
Back