Author Topic: Hello I am looking for some troubleshooting advice  (Read 1971 times)

drjazz

  • Newbie
  • *
  • Posts: 6
    • View Profile
Hello I am looking for some troubleshooting advice
« on: July 10, 2012, 07:31:44 PM »
I am trying to figure out why my scooter won't start.  When I press the ignition I hear a whirring sound but the engine is not turning over.  Might it be a broken starter moter?  I really have no clue at this point and I am asking for help/advice.

Thanks,
Ed

thebatman

  • Hero Member
  • *****
  • Posts: 2432
  • The Bat lives on... like the fkn Energizer Bunny
    • View Profile
Re: Hello I am looking for some troubleshooting advice
« Reply #1 on: July 10, 2012, 07:38:17 PM »
My scooter has done this as well...
It does not correct the 2nd time you press the switch?
Either battery is to low OR the starter bendix is going...
I would charge the battery 1st though and see if that corrects anything.......
"THE BAT"MAN...
Says:
"A goal without a plan is just a dream"......

Jim Moore

  • Jr. Member
  • **
  • Posts: 89
    • View Profile
Re: Hello I am looking for some troubleshooting advice
« Reply #2 on: July 11, 2012, 12:41:28 PM »
Out of curiosity, can you kick-start it?

juice

  • Hero Member
  • *****
  • Posts: 668
    • View Profile
Re: Hello I am looking for some troubleshooting advice
« Reply #3 on: July 11, 2012, 12:47:35 PM »
You should be able to kick start it if it is on the center stand , kill switch off , key in on position and the brake handle depressed . Good luck .
« Last Edit: July 11, 2012, 07:24:49 PM by juice »

drjazz

  • Newbie
  • *
  • Posts: 6
    • View Profile
Re: Hello I am looking for some troubleshooting advice
« Reply #4 on: July 11, 2012, 07:11:39 PM »
My scooter has done this as well...
It does not correct the 2nd time you press the switch?
Either battery is to low OR the starter bendix is going...
I would charge the battery 1st though and see if that corrects anything.......

Is the starter bendix the same as starter clutch?  Also I have removed the two bolts holding the starter motor but I am not able to just pull it out, why not?  And is the bendix built into the starter motor?  Or is it located elsewhere?

No to your question, it just keeps whirring everytime.

drjazz

  • Newbie
  • *
  • Posts: 6
    • View Profile
Re: Hello I am looking for some troubleshooting advice
« Reply #5 on: July 11, 2012, 07:13:04 PM »
Out of curiosity, can you kick-start it?

So far the kick start ain't happening.

drjazz

  • Newbie
  • *
  • Posts: 6
    • View Profile
Re: Hello I am looking for some troubleshooting advice
« Reply #6 on: July 11, 2012, 07:14:04 PM »
You should be able to kick start it if it is on the center stand , kill switch off , key in on posirion and the brake handle depressed . Good luck .


No luck with kick starting.

drjazz

  • Newbie
  • *
  • Posts: 6
    • View Profile
Re: Hello I am looking for some troubleshooting advice
« Reply #7 on: July 11, 2012, 07:57:06 PM »
Is the starter bendix the same as starter clutch?  Also I have removed the two bolts holding the starter motor but I am not able to just pull it out, why not?  And is the bendix built into the starter motor?  Or is it located elsewhere?

No to your question, it just keeps whirring everytime.

An Error Has Occurred!

Call to undefined function split()