Author Topic: 2009 xcite 500i factory materials used  (Read 2931 times)

cindav

  • Newbie
  • *
  • Posts: 2
    • View Profile
2009 xcite 500i factory materials used
« on: September 09, 2012, 09:22:44 PM »
Good day all,

I have the 2009 Xcite 500i and need to know what type of paint finish to the body panels, I need to do some touch-ups, plus, what material is the windshield made of. Any advice would be appreciated.

Cheers

Scarsegit

sissy mary

  • Hero Member
  • *****
  • Posts: 968
    • View Profile
Re: 2009 xcite 500i factory materials used
« Reply #1 on: September 10, 2012, 01:30:56 PM »
? Call a dealer. They should have touch up paint also.  :-*

rick71

  • Full Member
  • ***
  • Posts: 200
    • View Profile
Re: 2009 xcite 500i factory materials used
« Reply #2 on: September 15, 2012, 02:01:54 AM »
Depending on the model, there may not be any touch up paint. I have the red 500x. A fair amount of clear plastic over the ... paint... which has faded badly. The only for me is to replace the plastic, or completely paint it.
Rick

Urbestfriend

  • Sr. Member
  • ****
  • Posts: 430
    • View Profile
Re: 2009 xcite 500i factory materials used
« Reply #3 on: September 16, 2012, 11:49:13 AM »
Go to PEP Boys or another Auto Parts store.  Usually have a wide selection,
Just pick one.

sissy mary

  • Hero Member
  • *****
  • Posts: 968
    • View Profile
Re: 2009 xcite 500i factory materials used
« Reply #4 on: September 16, 2012, 03:10:26 PM »
If no touch up paint for your bike, they should at least have the paint code? And then an auto body paint store could match it up for you. And remember, there is a clear coat on all paints now.  :-*

bdrannik

  • Full Member
  • ***
  • Posts: 111
  • Southwest Florida USA
    • View Profile
Re: 2009 xcite 500i factory materials used
« Reply #5 on: September 16, 2012, 04:28:41 PM »
Cindav/Scarsegit,

If you can tell me what color your scooter is I may be able to provide a paint color code.
2011 DT300i - Givi Windshield - HID 5K Low/High Beams - LED Tail/Turn/License Bulbs - Front signal mirrors converted to running lights/signal - Dummy bulbs to LED 5K white running light/amber signals -  Givi E55 w/Admore LED Kit & custom paint - Scorpio SR-i900 Alarm - NGK CR7EIX - Amsoil Synthetics

Spindrift

  • Jr. Member
  • **
  • Posts: 64
    • View Profile
Re: Sv: 2009 xcite 500i factory materials used
« Reply #6 on: September 17, 2012, 03:53:16 AM »
If you not find touch up paint, a serious paint store should be able to scan and then mix some for you.

JIke03

  • Newbie
  • *
  • Posts: 19
    • View Profile
Re: 2009 xcite 500i factory materials used
« Reply #7 on: October 19, 2012, 06:47:24 PM »
Cindav/Scarsegit,

If you can tell me what color your scooter is I may be able to provide a paint color code.



I am looking for the color code for 2009 Xciting Red

sissy mary

  • Hero Member
  • *****
  • Posts: 968
    • View Profile
Re: 2009 xcite 500i factory materials used
« Reply #8 on: October 19, 2012, 10:25:29 PM »
A dealer can tell you the code. :-*

fshfindr

  • Hero Member
  • *****
  • Posts: 547
    • View Profile
Re: Sv: 2009 xcite 500i factory materials used
« Reply #9 on: October 19, 2012, 11:05:24 PM »
If you not find touch up paint, a serious paint store should be able to scan and then mix some for you.
After about 6 months, I'm still waiting for the dealer to get me the touch up paint.  But as Spindrift said, go to a serious auto paint store.  That's what I did, I had to bring them the bike and they were able to match the color perfectly.  Sold me the paint in a spray can and now it is perfect.  If you are in New Jersey or nearby, I can give you the info.

Richard L.

Richard L. in Bellmawr
Keep The Rubber Side Down & The Helmet Side Up

rick71

  • Full Member
  • ***
  • Posts: 200
    • View Profile
Re: 2009 xcite 500i factory materials used
« Reply #10 on: October 20, 2012, 03:16:51 PM »
Did you paint the entire panel, and which panel was it?
Rick

An Error Has Occurred!

Call to undefined function split()