« previous next »
Pages: [1]

Author Topic: Slight hesitation  (Read 1393 times)

mrmike

  • Hero Member
  • *****
  • Posts: 684
  • Syuracuse, NY
    • View Profile
Slight hesitation
« on: September 15, 2012, 11:05:06 AM »
I have a People 150. The carb, jetting and airbox are all stock. The ignition is stock except for a iridium spark plug. I have installed a NHRC exhaust system, a 1500rpm contra spring, and replaced the stock 15gram rollers with 13gram rollers. The scooter takes off great, then has a slight hesitation, then picks up again right up throught the power band. Top speed is a GPS verified 60mph. Scooter runs and starts great other than that hesitation. I believe the hesitation was there when new, but seems more pronounced with the mods I've made. Any suggestions?
Logged
Blue '23 People S 150i ABS  Moto Discovery GPS bar, Shad SH33 top case, Iridium spark plug, Black reflective graphics, Battery Tender ring terminal cable, LED tag light.         
Past rides- '73 Honda 450, '00 Harley Softail Deuce, '10 Kymco People 150, '12 Kymco GTI 300, '21 Kymco X-Town 300i AB

swiftscoot

  • Newbie
  • *
  • Posts: 11
    • View Profile
Re: Slight hesitation
« Reply #1 on: September 22, 2012, 09:02:37 PM »
What happens when you're in the mid powerband and you pull full throttle?
Logged

mrmike

  • Hero Member
  • *****
  • Posts: 684
  • Syuracuse, NY
    • View Profile
Re: Slight hesitation
« Reply #2 on: September 27, 2012, 04:20:46 PM »
Power is smooth and steady if applied at mid range. Only notice hesitation when going from lower speed or start
Logged
Blue '23 People S 150i ABS  Moto Discovery GPS bar, Shad SH33 top case, Iridium spark plug, Black reflective graphics, Battery Tender ring terminal cable, LED tag light.         
Past rides- '73 Honda 450, '00 Harley Softail Deuce, '10 Kymco People 150, '12 Kymco GTI 300, '21 Kymco X-Town 300i AB

swiftscoot

  • Newbie
  • *
  • Posts: 11
    • View Profile
Re: Slight hesitation
« Reply #3 on: September 30, 2012, 06:02:25 AM »
Sounds like your idle jet might be too small.
Logged

An Error Has Occurred!

Call to undefined function split()
Back