Author Topic: helppp very urgent !!!!!!!  (Read 3951 times)

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7763
  • West Tennessee, USA
    • View Profile
Re: helppp very urgent !!!!!!!
« Reply #15 on: February 12, 2013, 04:58:05 PM »
I guess we will never know.....

Karl
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

naughty lee

  • Full Member
  • ***
  • Posts: 203
  • 64 mph and pushing
    • View Profile
Re: helppp very urgent !!!!!!!
« Reply #16 on: February 13, 2013, 10:01:32 AM »
He's probably sold it. I would have cleaned and gapped the plug, cleaned the carb out and put fresh fuel in, checked the mixture, washed the air filter and cleaned the box out, then checked for any nipped or damaged fuel lines/ breathers/ vacuum hoses.

From there, a compression test, exhaust check etc. but that's just years of experience.

His bike probably has no two stroke oil in it!

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7763
  • West Tennessee, USA
    • View Profile
Re: helppp very urgent !!!!!!!
« Reply #17 on: February 13, 2013, 04:42:40 PM »
I sold a 1959 SAAB GT750 car to a guy in LA in the late '60s. This little sporty front wheel drive two-door was well-sorted out by yours truly and came with a full set of written instructions on the operation, care and feeding. Two weeks later this pin-head calls me up and says it is not running well. I load up my tool bag and head to his location to confirm this problem. I get there and both ends have been smashed in, driving lights mere shells and other indications of abuse. It started and ran but roughly. Pulling the center plug (three cylinder, two-stroke) revealed a hole in the center piston. Pin-head tells me he has been using cheap gas since it was an "economy car". My instructions stated to use the highest octane available since it was a high compression engine (10.5:1) and would not work properly on low octane gas. Pin-head never got it as he was convinced it was an "economy car". I told him "tough. My guarantee was void since he did not follow instructions. Your years of experience match mine and I don't think elyk gets it.

Notice I did not call any names.....

Karl
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

Vivo

  • Hero Member
  • *****
  • Posts: 4980
    • View Profile
Re: helppp very urgent !!!!!!!
« Reply #18 on: February 14, 2013, 02:37:43 AM »
Wow Karl, a GT750? A very sexy car....

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7763
  • West Tennessee, USA
    • View Profile
Re: helppp very urgent !!!!!!!
« Reply #19 on: February 15, 2013, 10:41:44 PM »
Yeah! 48 hp from 45 cubic inches on an 1800 lb car. Would verily scream once wound up......I even put metallic linings in the otherwise useless drum brakes: would stop repeatedly with no fade!

Karl
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

LoveMyKymco

  • Sr. Member
  • ****
  • Posts: 491
    • View Profile
Re: helppp very urgent !!!!!!!
« Reply #20 on: February 15, 2013, 11:33:18 PM »
We had a 750 running on 75% diesel 25% toulene. Fun little cars.
My 82 mph Killer Full MHR zx50 build (now 91 mph gps verified)
http://www.kymcoforum.com/index.php?topic=7795.0
My Fabrizi/MHR "can it cost anymore?" build
http://www.kymcoforum.com/index.php?topic=12146.0;topicseen

An Error Has Occurred!

Call to undefined function split()