..well, what i did, was run a 16g wire off the battery, to an inline fuse...
.. used a 500 milliamp fuse (1/2 amp)...
..from the inline, i ran another 16g wire to a toggle switch that i mounted inside the front cowling...any convenient location will do...
..off the secondary side of the switch, connect as many positive (+) LED circuits as you need to...
..my a50 has 4 circuits with a total of 120+ individual LEDs..
..attach a 16g wire (black) to the negative (-) post of your battery...
..terminate all LED negative wiring to that black wire...
..you now have a protected, controllable LED ground effect light circuit...
easy as pi !!..