Kymco zx50 super fever 50-60 mph free modification

[theaggravatedjew]

Jasil variator with boss is on the way,would this cdi work if i muff up the wire splice job? I'm so interested in the zx50 i stopped with the ruckus mods a bit. I'm starting to think the ruckus needs to transform into a two stroke
 

http://pages.ebay.com/motors/link/?nav=item.view&id=280627819861

[LoveMyKymco]

Its not a direct swap for that cdi. The ones for the gy6 are the correct pin style. You can also do what I did and use the old cdi harness part to mate it to that cdi.

[donut]

  Is this still the varistor/ pipe combo to look for?

Did you buy the variator yet?
I live near Colorado Powersports and may buy one for myself.
They sell (sold) the jasil variator on Ebay for $80 shipped, so I might be able to negotiate a lil better to offset the shipping to the UK
pm me if interested.

[theaggravatedjew]

I'm  in the US also, and yes I ordered through them.  I appreciate the offer though.

[naughty lee]

Well! We've had a drive failure. Turns out we has the wrong sized rollers in the variator. One jammed and caused a bit of a mess. Damaged sliders and the variator drive bush. Another variator was fitted but the bike lost 19 mph worth of speed as a result.
Fortunately we managed to press the (now oval shaped) bush out of the fast variator. a good friend machined me a replacement bush. It took around two hours on the lathe to make the part, but its back together again.
A speed test saw an indicated 63 mph ( down hill of course )

[theaggravatedjew]

had anyone here current actually run the jasil varistor?  I got the cvt cover off after a battle, then cleaned it only to realize the variator will not fit.  So pissed off with the kymco at the moment that Ive had to walk away

[naughty lee]

I take it the variator fits, but the cover won't go back on ?

[theaggravatedjew]

It will clear the gear jagged part of the crankshaft just barely super tight, but won't go beyond that. This is an issue of millimeters, maybe it was made for the earlier kymco? 

[theaggravatedjew]

I have the kysc10. The boss didnt appear restricted is the difference subtle?

Dies anyone have a pic of a restricted next to an unrestricted?

[naughty lee]

It will clear the gear jagged part of the crankshaft just barely super tight, but won't go beyond that. This is an issue of millimeters, maybe it was made for the earlier kymco?

How much did you pay for it ?

[theaggravatedjew]

$80 usd from colorado powersports on ebay

[naughty lee]

Nightmare. Have you been back in touch with them ?

[theaggravatedjew]

ya.  They are going to let me return it.  My stock drive boss doesnt look restricted.  Im more bummed about the variator not working than worried about the return.  My scoot is a 2006, maybe this variator is intended for the earlier model

Nightmare. Have you been back in touch with them ?

[naughty lee]

I would have tried your stock boss, inside the new variator.

[LoveMyKymco]

The jasil works fine with out using the supplied boss and using the stock one. Ive never used the supplied boss because its 4 mm taller i think if I remember right. Polini is a better variator.