roller weights....?

[eyco]

hi, i want to replace the oem weights for Dr.pully sliding weights. any suggestion on the weight of the weights?
the oem is 21g so i was thinking on the 24g. or should i stay with the 21g by dr.pully? i more into high speed but keep a reasonable takeoff in the city.

[dejzebmoorbn]

http://scootdawg.proboards.com/index.cgi?board=talk&action=print&thread=13775

Good info, though not B&W specific. Consensus is sliders are better than rollers. I'm staying close to 20g (19-21 probably).

[NigelB]

I have been using 24g weight rollers for 30 000km (19000 miles). They work for me and dropped my topend revs a whole lot, but then again I am a skinny guy at 160 lb. My next weights will be 26g or 28g.

[zombie]

Go heavier than your current weights to keep the same cruise rpm. Staying the same will increase rpm's

[Trancebear]

My 2006 had 20g stock and my RPM's where not hitting the HP peak I wanted so I dropped then down to 16g. I weigh 380lbs so I have to do this on every scooter I own. I went with Dr. Pulley Sliders as with all my other scooters.