Author Topic: 2012 Like 200i with windsheild  (Read 2465 times)

91cavgt

  • Full Member
  • ***
  • Posts: 221
    • View Profile
2012 Like 200i with windsheild
« on: April 12, 2013, 12:21:12 AM »



The dealer threw it on for free when I bought it.  I don't know what windshield it is, but it does a really good job.  The receipt showed it ran $199 at MSRP.  It just needs to be slightly raised as at highway speeds, I'm getting some wind buffeting at the top of my helmet.  I'm 5'6" btw.  I have not tried riding it without the windshield, but as with pretty much every other Like 200i out there, it tops out at 60 mph.  I only have 220 mile on the scoot so I do not have an accurate gas mileage reading yet.   
2012 Like 200i  in black

donandrews

  • Full Member
  • ***
  • Posts: 113
    • View Profile
Re: 2012 Like 200i with windsheild
« Reply #1 on: April 14, 2013, 05:46:37 AM »
Nice picu ! I have an ivory one with same w/shield. How do you keep the headlight reflection from blinding you off the bottom of your windshield at night? I had to put a strip of 2'' black tape across the top of the light.  >:(
2012 Like 200i   
Lusting for People 300GTI, but recently purchased Vespa 250GTSie instead.
Brownsville OR 
Home of Willamette Country Music Festival and
movie "Stand By Me"


Normal is Relative

Brighton52464

  • Newbie
  • *
  • Posts: 11
  • Can you see the real me?
    • View Profile
Re: 2012 Like 200i with windsheild
« Reply #2 on: April 14, 2013, 08:15:00 AM »
I bought that same windshield and had the same exact problem riding at night with the bottom hanging over the headlight. A total pain and I'm out $100. Wish I would have shopped around for one. Love the Like 200i. I'm enjoying getting know the scooter and this forum is amazing. I've learned more in a few hours than I had in weeks not on the forum.

91cavgt

  • Full Member
  • ***
  • Posts: 221
    • View Profile
Re: 2012 Like 200i with windsheild
« Reply #3 on: April 17, 2013, 08:23:35 PM »
Here is a pic of the single strip of black electrical tape that I used. 





I am working on trying to figure out how to block the light while looking a bit better than this.  I have a few ideas and will post up a response when I figure it out. 
2012 Like 200i  in black

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7765
  • West Tennessee, USA
    • View Profile
Re: 2012 Like 200i with windsheild
« Reply #4 on: June 03, 2013, 09:41:17 PM »
Where does one get a shield like that?

Karl
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

desliderman

  • Full Member
  • ***
  • Posts: 119
    • View Profile
Re: 2012 Like 200i with windsheild
« Reply #5 on: June 04, 2013, 02:34:52 PM »
Nice windshield.  Looks good on a good looking scoot.

Don in KC.

mrmike

  • Hero Member
  • *****
  • Posts: 748
  • Syuracuse, NY
    • View Profile
Re: 2012 Like 200i with windsheild
« Reply #6 on: June 11, 2013, 09:05:26 PM »
Here is a pic of the single strip of black electrical tape that I used. 





I am working on trying to figure out how to block the light while looking a bit better than this.  I have a few ideas and will post up a response when I figure it out.

   Instead of electrical tape, why not use black reflective tape? I would try also cutting the ends at a angle or a curve. Maybe even tapering it down a little on the ends.
Blue '23 People S 150i ABS  Moto Discovery GPS bar, Shad SH33 top case, Iridium spark plug, Black reflective graphics, Battery Tender ring terminal cable, LED tag light.         
Past rides- '73 Honda 450, '00 Harley Softail Deuce, '10 Kymco People 150, '12 Kymco GTI 300, '21 Kymco X-Town 300i ABS

An Error Has Occurred!

Call to undefined function split()