« previous next »
Pages: 1 [2] 3

Author Topic: valve clearance gauge size  (Read 7594 times)

Stig / Major Tom

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 14691
  • Rural Ohio
    • View Profile
Re: valve clearance gauge size
« Reply #15 on: May 02, 2018, 11:36:41 AM »
Quote from: Jmerr17 on May 02, 2018, 11:31:02 AM
Hey I actually found it. It was at the bottom of my bike by the fly wheel thanks
Sent from my LG-H918 using Tapatalk


Yeah, found the important to me date of manufacture while lying on my back using a flashlight.☺
Stig
« Last Edit: May 02, 2018, 06:58:42 PM by Stig »
Logged
Boston Strong
Rural Ohio

And, I'm feeling a little peculiar.

Jmerr17

  • Newbie
  • *
  • Posts: 25
    • View Profile
Re: valve clearance gauge size
« Reply #16 on: May 02, 2018, 11:40:15 AM »
Hey I made a video of my weird bike do you have an email so I can send it to you
Quote from: Stig on May 02, 2018, 11:36:41 AM
Yeah, found the important to me date of manufacture while lying on my back using a fladhlight.☺
Stig

Sent from my LG-H918 using Tapatalk

Logged

Stig / Major Tom

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 14691
  • Rural Ohio
    • View Profile
Re: valve clearance gauge size
« Reply #17 on: May 02, 2018, 06:59:49 PM »
Quote from: Jmerr17 on May 02, 2018, 11:40:15 AM
Hey I made a video of my weird bike do you have an email so I can send it to you
Sent from my LG-H918 using Tapatalk


Put it on youtube, and we can all  look at it.
Stig
Logged
Boston Strong
Rural Ohio

And, I'm feeling a little peculiar.

Jmerr17

  • Newbie
  • *
  • Posts: 25
    • View Profile
Re: valve clearance gauge size
« Reply #18 on: May 02, 2018, 10:09:47 PM »
Hey Stig I uploaded yesterday here's a link


Sent from my LG-H918 using Tapatalk

Logged

Viper254

  • Hero Member
  • *****
  • Posts: 817
  • Moped Pirate
    • View Profile
Re: valve clearance gauge size
« Reply #19 on: May 03, 2018, 07:57:36 AM »
Quote from: Jmerr17 on May 02, 2018, 10:09:47 PM
Hey Stig I uploaded yesterday here's a link


Sent from my LG-H918 using Tapatalk

Hey man, I've just had a look at your video too.

Have you taken the plug out to check if you're getting a spark? From a cursory glance it all looks pretty healthy.
Logged
Rides;

Suzuki GW250 Inazuma (2016)
Honda C70C (red, 1983)

Jmerr17

  • Newbie
  • *
  • Posts: 25
    • View Profile
Re: valve clearance gauge size
« Reply #20 on: May 03, 2018, 10:14:11 AM »
Yes I've check and I have spark. This is really blowing my mind

Sent from my LG-H918 using Tapatalk

Logged

Viper254

  • Hero Member
  • *****
  • Posts: 817
  • Moped Pirate
    • View Profile
Re: valve clearance gauge size
« Reply #21 on: May 03, 2018, 01:11:53 PM »
I'm sure it's a stupid question but have you timed it up on the correct stroke? I'm having a memory blank but it should be timed on the compression stroke rather than the expelling stoke.

I have once seen it done where it was timed incorrectly somehow - with the cam 180 degrees out.
Logged
Rides;

Suzuki GW250 Inazuma (2016)
Honda C70C (red, 1983)

Jmerr17

  • Newbie
  • *
  • Posts: 25
    • View Profile
Re: valve clearance gauge size
« Reply #22 on: May 03, 2018, 01:26:37 PM »
Timing must be set when both valves are closed. When you pull on both intake and exhaust rocker arms should get a little play

Sent from my LG-H918 using Tapatalk

Logged

Stig / Major Tom

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 14691
  • Rural Ohio
    • View Profile
Re: valve clearance gauge size
« Reply #23 on: May 03, 2018, 02:12:06 PM »
Quote from: Jmerr17 on May 03, 2018, 01:26:37 PM
Timing must be set when both valves are closed. When you pull on both intake and exhaust rocker arms should get a little play

Sent from my LG-H918 using Tapatalk


Yes, we had a new member who did a valve lash set. ...and scoot now would not run afterwards. Talking him through finding true TDC again, after he lost it....was not ever successful. Pretty darn sure he had set them on the wrong stroke.
Wouldn't run, and never heard from him again.
If you don't feel slight movement in those rocker arms - STOP....you're not at top dead center. Rotate engine again.
Stig
Logged
Boston Strong
Rural Ohio

And, I'm feeling a little peculiar.

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7763
  • West Tennessee, USA
    • View Profile
Re: valve clearance gauge size
« Reply #24 on: May 03, 2018, 06:52:27 PM »
And make sure when crank/flywheel is showing on TDC that the cam is showing it is in the correct position. The spark fires every revolution from the flywheel/"pulsar" not from the cam. I said that to make sure! Your voice said you replaced the fuel pump. Did you mean the vacuum operated fuel valve?
Logged
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

Jmerr17

  • Newbie
  • *
  • Posts: 25
    • View Profile
Re: valve clearance gauge size
« Reply #25 on: May 03, 2018, 07:12:53 PM »
Yes the vacuum operated fuel pump

Sent from my LG-H918 using Tapatalk

Logged

Jmerr17

  • Newbie
  • *
  • Posts: 25
    • View Profile
Re: valve clearance gauge size
« Reply #26 on: May 03, 2018, 11:17:29 PM »
Hey guys I was going through all of my images I have taken of my bike and I noticed there's a crack in my manifold boot gasket. I wonder maybe is this the cause of her not starting..

Sent from my LG-H918 using Tapatalk

Logged

Stig / Major Tom

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 14691
  • Rural Ohio
    • View Profile
Re: valve clearance gauge size
« Reply #27 on: May 03, 2018, 11:36:21 PM »
 :)
Maybe.
Something's not letting that fuel flow.
Stig
Logged
Boston Strong
Rural Ohio

And, I'm feeling a little peculiar.

CROSSBOLT

  • Hero Member
  • *****
  • Posts: 7763
  • West Tennessee, USA
    • View Profile
Re: valve clearance gauge size
« Reply #28 on: May 04, 2018, 07:12:14 PM »
Yes the vacuum operated fuel pump

This is really picky but your fuel tank is above and behind the engine, right? There is no fuel pump. Gravity puts fuel in the carb float bowl. There IS  vacuum operated fuel valve that opens so gas can flow to the carb. It opens when the engine spins and the throttle is closed. Any vacuum leak like that crack in the intake gasket could keep that fuel valve closed.
Logged
Karl

Three motorcycles 1960-1977 (restored a 1955 BSA)
Agility 50
Yager 200i
Downtown 300i
Navy tech, Ships Engineer, pilot and aircraft mechanic

Jmerr17

  • Newbie
  • *
  • Posts: 25
    • View Profile
Re: valve clearance gauge size
« Reply #29 on: May 04, 2018, 07:45:13 PM »
Kool I am ordering one today and plus I just noticed my bottom chain guide is broken...so I have to pull the header and replace that as well. When it rains it pours...smh

Sent from my LG-H918 using Tapatalk

Logged

An Error Has Occurred!

Call to undefined function split()
Back