« previous next »
Pages: [1]

Author Topic: Ignition Coil  (Read 1204 times)

Kenho21

  • Sr. Member
  • ****
  • Posts: 418
  • I live my life 0.402336 kilometers at a time
    • View Profile
Ignition Coil
« on: July 30, 2009, 07:36:20 PM »
I was recently changing my spark plug and I pulled the wire out of the cap that goes on top of the spark plug. It left a screw exposed which I just pushed back into the wire. Is that supposed to come off? I don't see a spark anymore but it I may have just not saw it I'm gonna check again when I get home.
Logged
2009 Kymco Agility 50- 72cc Airsal kit, Uni Free-Flow Air Filter, Main Jet 120, 1500 Contra Spring, 6g Rollers, Malossi Multivar Variator, NCY Exhaust, NCY 80cc Camshaft, Cut CDI, Smooth Boss Drive, MRP Ignition Coil

Shaka

  • Hero Member
  • *****
  • Posts: 1660
    • View Profile
Re: Ignition Coil
« Reply #1 on: July 30, 2009, 09:52:55 PM »
The spark plug cap just screws onto the coil wire.  It has a pin down in there that is threaded.  Just screw the cap back onto the coil wire, making sure that the pin goes into the center where the wires are.  If you are questioning whether it is working.  It is real easy to get a voltmeter and test.  I could look up the proper specs if you need.
Logged

Kenho21

  • Sr. Member
  • ****
  • Posts: 418
  • I live my life 0.402336 kilometers at a time
    • View Profile
Re: Ignition Coil
« Reply #2 on: July 30, 2009, 11:26:02 PM »
I got it handled it, I think the problem was too large of a jet in the carb. I put the old one back in and it seems to be running fine. I think i just couldn't see the spark because its small on those little plugs, Lol.

Much Thanks,
                   Ken
Logged
2009 Kymco Agility 50- 72cc Airsal kit, Uni Free-Flow Air Filter, Main Jet 120, 1500 Contra Spring, 6g Rollers, Malossi Multivar Variator, NCY Exhaust, NCY 80cc Camshaft, Cut CDI, Smooth Boss Drive, MRP Ignition Coil

An Error Has Occurred!

Call to undefined function split()
Back